R33 Dr Drift Ecu And High Flow Injectors, 240rwkw

[liampire]

Item:

1. Dr Drift Chipped RB20 Ecu for an R33 Skyline.

2. High flowed standard side feed injectors (800cc).

Location: Brisbane Northside

Website: Boostcruising.com & SAU.com

Item Condition: Perfect

Reason for Selling: Going back to standard setup

Price and Payment Conditions: $650

Extra Info: Tuned at Mercury Motorsport. Have receipts and dyno readout. This ECU will not need to be re-tuned for these injectors. Swap in and drive. I can install these injectors for an additional cost

Pictures:

Contact Details: PM or call Liam - 0400 124 322

[quarkgun]

Does this have the same loom as the standard ecu? i.e. is it going to be a plug and play affair?

Also, what other mods was it tuned for?

[liampire]

RB20 and 25 are much the same. The 32 ECU does not support variable valve timing however that is only active up to 3000rpm and honestly you don't notice any difference. This ecu was tuned for an internally standard rb25 series 1 motor with the high flowed standard injectors, kkr 430 turbo running 14psi, standard air flow meter, walbro 550hp pump, and usual exhaust and intercooler mods. Obviously it can run more than 14psi if you want to. Boost was increased to 18psi and was a very quick car. 14psi is perfect for street. More power can be had with a z32 afm however you would need a re-map which is quite cheap at around $200. With the correct turbo this setup can handle 300rwkw easily on a standard motor, 270rwkw for reliability day in day out.

Edited June 5, 2009 by liampire

[liampire]

BUMP

[chrisdoherty]

ecu plug straight in to rb25 loom? also i take it the limiter remains at 8000rpm being rb20 instead of 7200rpm rb25 limiter? Will you sell just ecu if so how much?

thanks