Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Didn't read the whole thing but to the guy who started the thread, pretty sure 18" Drift-teks do not come in black, Koya only supply the black wheels up to 17" size, so if you want black 18's budget a bit more money for aftermarket painting.

Oh and I believe the Skyline gods would say that 235's on a 9.5" wide rim is perfectly acceptable, looks good and is not overly stretched (in fact tyre manufacturers say it will fit comfortably).

Look what you wrote above i.e. You run positive camber. I interpreted this exactly the way it's written.

You didn't say you dialed in more positive camber to offset the excessive negative camber, however, overall, you still retain a little bit of negative camber.

That's a bit unfair, you left out of the quote the part of his post where he said it sits almost flat...this indicated to me that he was using the positive camber to offset negative. Also, he did state in a post not long after, that he runs positive to compensate for the negative camber caused by lowering the car.

Then, maybe I was just on the same wavelength as Hamish :)

I have 18x9 + 30 on the front. I had 20mm spacer added to that so that made it +10, I had the front banged up abit and it was still scrapping so its now back to +30. If you want your car to be nice and high you could get away with the +10 offsent but mine is slammed on the front.

Edited by blags

black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black

black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black black

+1

Nice one, did you need any rolling/lipping? I can't tell it looks stock to me!

it's actually a mates car..

the guards are definately rolled though, the rear guard lips were rolled pretty flat as that was the main rubbing area.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...