Jump to content
SAU Community

R33 Gtr Skyline

Adz2332
 Share

Recommended Posts

Adz2332 Grand Master

Adz2332

Posted
Posted

Im after a house so reali need the cash unfortunatly as i do love this car.. Fast, handels, great car.

Would be interested in a swap for a 180sx, 33 or 32 or something like that plus cash.

The car is a 1995 R33 GTR

Midnight Purple

The car had done 90xxx kms has had its 100xxx service, change 4wd fluid, gearbox oil etc etc All work always done at a trusted adel workshop. The engine let go and has been replaced with an engine that has only done 60xxxx also had its 100xxx major service. Dyno and compression tested fine. Tuned fine etc

Will give you the name of the workshop as they will vouch for the car.

Has been looked after well and always tuned etc. Ive had No accidents in the car.

Good paint and interior.

The part list is as follows

Exhaust:

Kakimoto Catback Exhaust, front pipe, high flow cat (Still have standered exhaust)

(sounds hot!)

Suspension:

New blisten Shocks, Lowered King Springs

Wheels:

Standered Rims But with excellent tyers

All the mods have seen less then 100kms travled.

Modifications:

700cc SARD injectors

Custom Cold Air Intake

Big Trust Intercooler

Nismo Fuel Pump

Power Fc and Controller

ORC Twin Plate Clutch

Resprayed Brembo brakes / Stickers

Clear front and side indicators

Good headunit front speakers

Aftermarket catch can and washer bottle

Colour coded the rocker covers to car colour also put on a R34 GTR coil cover

new leather hand brake and gear cover

Power was at an easy 269kws at all for wheels. But since the new engine have tuned it down. Just to be safe. Still very quick.

Diff and gearbox are fine and maintained.

New engine

Im fairly open in price and Would be interested in a swap for a 180sx 33 32 GTST or something like that plus cash.

As stated im only selling as im buying a house...

Any offers will be considered! :S sad sad day selling this car

I do have a heap of spare parts and standered parts and with the right price i will throw in some/all.

Some spares include -

N1 R33 GTR turbos

Work XD9s 18 x 10 +18 with Kumo 275s all round less then 1000kms travled, no marks on the rims at all. Perfect

TOMEI cam gears

HKS pods

Greedy Profec 2 Boost Controller

HKS boost gauge

Carbon N1 Wing Blade

Greddy Strut Brace

Greddy Air Devision Panel

New GTR KEY (uncut)

passenger headlight.

Twin Turbo Inatke pipe

33 gtr Plenum

standered ECU

Genuine GTR grill

Cam and rocker covers

Near New Water Pump

As is id hope for around $27,500, ONO!!! But with some of the parts add a little more. Or we can work something out etc!

Im pretty open to offers so feel free to throw anything my way. Need cash for my house

PM me for offers etc

Thanks

post-33454-1244595618_thumb.jpg

post-33454-1244595833_thumb.jpg

post-33454-1244595894_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/274043-r33-gtr-skyline/
Share on other sites
Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted
Adz, You've seen my car. What sort of cash would you be after mate? Ball park figure?

Sorry not after a straight swap.

Problem is mate i am after more cash then i am a hot car. If that makes sense.

I reali need to end up with $15,000 cash after ive sold the car and bought a new one.

Link to comment
https://www.sau.com.au/forums/topic/274043-r33-gtr-skyline/#findComment-4676441
Share on other sites
BIT SUS Mentor

BIT SUS

Posted
Posted
Yes it is PM replied.

Near Tea Tree Plaza

cool, round the corner from me then :P

saw you on Goodwood road tonight, but I didn't get a good enough look at the car, so I'll ring you tomorrow to organise a time to come have a look :)

Link to comment
https://www.sau.com.au/forums/topic/274043-r33-gtr-skyline/#findComment-4699599
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...