Jump to content
SAU Community

Recommended Posts

A friend of mine told me that at about 3000 kms his R35 started "clicking" loudly from the wheels on hard cornering. Well, on que, at almost exactly 3000 kms mine has started doing the exact same thing - and I havent even driven the car that hard. Sounds break-related. Does anyone else have this problem, or a remedy?

A friend of mine told me that at about 3000 kms his R35 started "clicking" loudly from the wheels on hard cornering. Well, on que, at almost exactly 3000 kms mine has started doing the exact same thing - and I havent even driven the car that hard. Sounds break-related. Does anyone else have this problem, or a remedy?

It sounds like the ball joints under pressure are you turning at full lock when this clicking sound happens. :(

Duncan, thanks for the link, it looks like they have it sussed out and are awaiting a fix for it. Also looks like a lot of GTRs have the problem. I'll take the info you sent me to Crawfords.

Cheers.

I had exactly the same noise when turning right at higher speeds, a couple of runs through Galston Gorge revealed this. The strange thing though is that the noise is now gone, I do not know what has changed.

On a side note just for readers information, there is a rattle noise from the front of the car when I go over a bump, this combined with with clicking when turning raised some flags. Anyhow after some inspections I found the issue for the rattle when going over the bumps, the top steel pin that goes through the caliper is a floating pin and vibrates and rattles.

I am curious who else has seen this.

Cheers

post-57732-1244937324_thumb.png

Edited by Gibbo_R35
I had exactly the same noise when turning right at higher speeds, a couple of runs through Galston Gorge revealed this. The strange thing though is that the noise is now gone, I do not know what has changed.

On a side note just for readers information, there is a rattle noise from the front of the car when I go over a bump, this combined with with clicking when turning raised some flags. Anyhow after some inspections I found the issue for the rattle when going over the bumps, the top steel pin that goes through the caliper is a floating pin and vibrates and rattles.

I am curious who else has seen this.

Cheers

Thanks Gibbo, interestingly the noise has not reappeared today on my car either. I havent had the rattle noise.

  • 7 months later...

I've had this clicking noise surface recently.

It seems the USA boys thinks it is one of these:

1. Missing top pad retaining SPRING (the front calipers usually only have one of these)

2. Rattling pad retaining PIN (as mentioned above)

3. Loose tie rod ends

Did you guys resolve this and/or had it resurface?

I'll add another one to this. I had the problem appear at around 9000 kms and took it in to Nissan. They said they spoke to Japan and diagnosed it as the fully floating rotor making noise because some anti-seize grease they use between it and the hub had washed out. Anyway they replaced it with a non genuine compound as they didn't have the proper stuff in stock and it lasted a week before the noise reappeared. I'm now on 17,000 kms and about to take it back in as I want that looked at as well as my MFD backlight dying on hot days as well as my interior mirror developing a droop on 40+ days after a day in the sun. I'll see if I have that retaining clip installed tonight and suggest that to them as well the tie rod end when I drop it off this week.

I've had this clicking noise surface recently.

It seems the USA boys thinks it is one of these:

1. Missing top pad retaining SPRING (the front calipers usually only have one of these)

2. Rattling pad retaining PIN (as mentioned above)

3. Loose tie rod ends

Did you guys resolve this and/or had it resurface?

No top pin anti rattle spring found and that upper pin clicks loudly with a similar sound when I push it side to side. To me it seems the obvious fault/problem. See what Nissan thinks...

Out of interest i put the car up on stands today, and started t up, put it in gear, bit of throttle, turned full lock (left) and no clicking. So when there is no load on the wheels/suspension i dont get the clicking. Might be a clue... anyway i am going to be taking a closer look over the next few days, just ran out of time today.

I'm no R35 mechanic (just a normal mechanic anyway :down: ) but a click on full lock is normally worn out CV joints. Has anyone actually got to the bottom of this problem yet?

Yes I can see how you would think that, that was my first suspicion as well but the Nissan Tech had a listen and said it definitely didn't sound like CVs. Plus a fiddle with the brakes and it gets better immediately, albeit temporarily in my case. In fact last night by just playing with the pins and moving them back and forth stopped the problem for about the first 20 mins of this morning's drive before they must've shifted again to their favourite rattling position! The sound from the pin when manually rattled does sound a lot like the click you hear whilst driving and the US guys seem to be convinced that the anti rattle spring omission seems to be the problem..

i havent read all the posts or the links, but ive had cars with similar issues (NOT R35) and with these cars its either a Faulty brake assembly (uneven ware on one pad), CV joints or a worn/broken wheel bearing..... ive eevn had a car with diff probs making a similar sound but for the rear of the car, and even the power steering...

Like i was saying i was getting the clicking, just turning left. Put the car up on stands and with no load on the wheel, and with wheel turning...no ticking. Anyway i had to replace the pads anyway... So i did remove the pad pins and re-install again. Also the tie rod end nut was not very tight, i could tighten a couple of turns. After i did all this and put it all back together the noise was gone! So unfortunately i can't isolate where the noise was coming from exactly. It's either the tie rod or something related to the caliper. It doesnt look like a stuffed CV. Interestingly also, i noticed the tie rod end cotter pin can rattle around, when you move it with your finger it sounds a hell of a lot like the noise in question.... tick tick tick... so i tapped it down tighter. Anyway the noise is totally gone for now i will let you know if it comes back. Relieved it's not a CV.

Edited by LSX-438

Was informed by Main North Nissan today that they have three owners with the clicking problem at the moment and are narrowing down the cause on a test mule. So they told me to hold off bringing in mine till they sort it out. I told them about the info available on the US forums regarding missing top anti rattle springs and loose tie rod ends and it appeared to be news to them! We'll see if they can come up with a permanent fix soon.

we get a lot of nissans with similar noises. found that the cv shaft spline is dry causing the clickling. i removed cv, lubed spline and retorque the hub nut properly and noise goes away...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...