Jump to content
SAU Community

Recommended Posts

I have too much stuff in my garage and house that I don't need.

Everything is in used condition unless stated otherwise.

Melbourne pickup is preferred but can send smaller items interstate if postage is agreed.

**I'm trying to post pics. atm but they're not uploading properly so please contact me and I'll send them.

If interested pm or [email protected]

Thanks for looking.

engine

turbosmart external wastegate pro-gate 45 $450

custom intercooler pipe with r33 gtr nissan bov 14483-05U00 $70

k&n mushroom filter RX-3900-1 + filter adaptor for subaru $60

justjap coolingpro intercooler 2.5" 600x300x76 (new) $120

r33 gtst front engine cross member $60

r34 gtst air box + intake pipe + recirculation pipe (no snorkel) $120

r33 gtst oem side mount intercooler + piping $100

nismo 6 x 740cc injectors 16600-RR544 (side-feed for r33 rb25/sr20) $500

nismo fuel pressure regulator (new) 22670-RR580 $160

nismo mounting bushes 11320-RSR40 (gearbox) 2 x 11220-RSR40 (engine) (new) $450

nismo thermostat 21200-RS580 (new) $160

r33 gtst rb25det racepace engine, arias forged pistons, gtr rods, n1 water/oil pumps, nismo bearings, machined/honed/prepped (never installed since rebuild) (excellent) $4000

r33 gtst gearbox + cross member $1100

r33 gtst/r34 gtt high energy 7.5 litre capacity sump (baffled for circuit use) (new) $700

r34 gts rear wheel hubs + brakes $150

r34 gts rear cradle $200

r34 gts lsd diff + driveshafts $200

suspension

r34 gtt dms blue 50mm coilover suspension (height/bump/rebound adjustable) (needs coilover tops) $2000

r34 gtt tein ra coilover suspension 10kg front/8kg rear + spare 4kg and 5kg rear springs + custom dustboots (aluminum body) (height/combined bump/rebound adjustable) (excellent) $2500

r33 gtst/r34 gtt 20mm front + 24mm rear adjustable whiteline swaybars (painted black) $350

r33/r34 rear camber + toe pillow ball arms + dust boots (painted black) $150

electrical

hks speed limit defencer type I with packaging 4502-RA002 (remove oem 180km/h limit r32/r33/r34/s13 and other makes) $170

r33 gtst ecu/engine loom $30

r33 gtst auto dash 47000km $30

r34 gtr v-spec rear computers + yaw sensor (unknown working conditon) $80

body

r34 gtr bonnet + hinges + latch (has minor damage but repairable) $500

r34 gtr tail-lights white (excellent) $400

r31 sedan head-lights (left + right) $50

Link to comment
https://www.sau.com.au/forums/topic/275509-r33-gtstr34-gtt-parts-for-sale/
Share on other sites

can you send pics to [email protected] of:

1. custom intercooler pipe with r33 gtr nissan bov 14483-05U00 $70

2. r33 gtst/r34 gtt 20mm front + 24mm rear adjustable whiteline swaybars (painted black) $350

is price neg? where abouts melb?

  • 5 months later...
  • 4 weeks later...

hey buddy, cant PM at this time..

just wondering what condition the r33 gearbox is? any crunching? smooth changes? any problems?

also, what are the nismo engine mounts off? are you willing to seperate the nismo gearbox mount?

im very keen. located in sydney but im heading to melbourne in a few days.. PM me your number and ill SMS you. cheers

  • 1 month later...
  • 3 weeks later...

is the r34 gt-t air box the same size as the r33 gts-t air box? only really after the bottom part.. Also, dont suppose the cooling pro FMIC is the return flow style with the piping is it?

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...