Jump to content
SAU Community

Recommended Posts

hey all..

finished my CA18DET ke70...

now it has been missfiring and idling like poo!

we have changed AFM, coilpacks, plugs from a perfect running CA18DET and put mine on the other CA and no change..

run injector cleaner.... no change.

cleaned all sensors, checked earths.. no change!

NOW heres the thing.......

it was running SWEET with no said issues in a bluebird no more than the day before it was lifeted out and dropped in the rolla!

NOTHING has been changed or removed...

what can i try to look for???

any ideas would be a great help!

thanks all...

Link to comment
https://www.sau.com.au/forums/topic/275591-ca18det-in-ke70-issues/
Share on other sites

yeh got a lift pump with surge tank.. mor ethan enough..

r we talking coilpack clips? as i have two semi broken tabs.. but they still sit all the way in..

wat other connectors can i check?

this might not be much help but have you checked if all the cooler piping is connected?

only reason i say this is because on my car it had came off where the old air box used to sit and couldnt see that it came off there, and was very barely running.

put it back on and ran perfectly :happy:

yeh have checked it all... gonna do a pressure test to c if there is any leaks.

will chase up another ecu.

fuel is new tank of bp ultimate..

brand new heavy duty battery connections..

but will double check all of these..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...