Jump to content
SAU Community

Recommended Posts

this company http://www.paintprotectiondirect.com.au/gallery.html that I saw mentioned in another thread sells this "Glare" product that's like a special polish that lasts for 5 years and requires no further polishing/waxing, yet giving a mirror like finish...

At first I thought my R34's paint is way too far gone for this but then I looked in their gallery and some of the cars esp. bonnets have worse fine scratches and chips BEFORE treatment and look like a fricken mirror after being treated with this product ... Wtf ? How can this be real and not be more popular?

Also the whole kit seems to be under $200 (DOUBLE MEGA WTFWTF!?) I've been thinking of respraying my whole exterior with same colour BUT might just try this stuff for a small fraction of a price of a paintjob...

Anyone here used it ? Is it really as good as they make it seem ?

Edited by Delta Force

Here's an example of BEFORE and AFTER ..just happens to be a Nissan too and the BEFORE pretty much looks like my paintjob lol.. wtf? The 'after' looks like a polished brand new paintjob..

post-49910-1245524891_thumb.jpgpost-49910-1245524900_thumb.jpg

Generally, off the shelf polishes last up to 6 months and higher end specialist brands last up to 12 months

The steps they describe are quite accurate (wash, de-wax, clay, polish, sealant), however 5 year protection is basically a gimmick, as swirls can be introduced after just one wash.

To bring back the life of your paint, you should consider getting your car professionally detailed, Dr. Detail has a great reputation in Sydney (and on this forum), his charge is around $350 - which is quite reasonable for the work he does so maybe give him a go.

just type "dr detail" in the search bar on this forum to see the work he's done for a few sau peeps

http://www.drdetail.com.au/ - website isn't operational but his number and email is there

all the best, and make sure to post pics!

Edit: just had a look at that Glare product, it's just a glorified waterless wash, put simply, the more rubbing and wiping you do (esp without water) as you wash, the more likely you are to introduce new swirls, without a good pre-rinse and snow-foam, you'll just be rubbing the dirt into your paint which will rape your paintwork with swirls and scratches

Edited by squareznboxez

I've used drdetail ...all the swirls and stuff came back after a few months after he did the detailing, so close to $500 down the drain there ($80 for interior ..just made it wet for a few days, no diff in looks)

The product above costs half of what he charges and isn't actually a traditional wax/polish product at all from what I understand .. it doesn't actually sit on top of the paint it fuses with it and it has 'liquid glass' type of crap in it. Not sure where you got the waterless wash from .. you still need to wash your car with water and low ph detergent.

Anyway, i'm gonna go in for an inspection and see what they say ..

Edit: oops, price of their complete detail appears to be around $700 for an older car incl. swirl removal followed by application of this Glare stuff. Quite costly .. may give it a miss unless I can find some spare cashola and they offer a good warranty.

Edited by Delta Force

ahahaha, I remember when I fell for buying this product. Let me guess, it's got that glassplexin stuff which turns to "glass" when it hardens on the car?

Don't waste you money mate, it's sh!t.

Not only is it difficult to apply, but it's a bitch to take off. I spent about 5 hours polishing my car, as soon as it rained, the polish went away...

STAY AWAY!

Go buy some meguiars wet look stuff for about $20. Does wonders.

I've used drdetail ...all the swirls and stuff came back after a few months after he did the detailing, so close to $500 down the drain there ($80 for interior ..just made it wet for a few days, no diff in looks)

What kind of process did he use to remove the swirls?

The reason i ask, is if he buffed them out, then the only way they could come back would be if someone put them there. Almost all swirls are caused through washing/polishing. A swirl cannot simply re-appear.

Most detailers for example use 2 buckets when washing, one for the suds, and a second to rince before getting more suds.

If on the other hand he simply used some sort of "filling" polish like Scratch X or something then yeah once it's life goes, the swirls come back.

Given his rep i honestly would be very surprised if he didn't buff out all the swirls.

I don't know about his "process" because I didn't stand around watch him do it, but I'm pretty sure he buffed them all out ..took a good 4 hours or so. Not all the swirls came back but 80-90% of them did and no, I didn't put them back there. Trust me, I'm extremely careful and anal about washing the car with clean mitts and lots of rinsing etc..

Edited by Delta Force
I don't know about his "process" because I didn't stand around watch him do it, but I'm pretty sure he buffed them all out ..took a good 4 hours or so. Not all the swirls came back but 80-90% of them did and no, I didn't put them back there. Trust me, I'm extremely careful and anal about washing the car with clean mitts and lots of rinsing etc..

haha, you sound like me whne it comes to washing :-)

If he buffed them, and they just re-appeared I'd be extremely pi$$ed. Especially that quickly.

Not pointing any fingers cause obviously i have no idea what he used or how he used it, just saying that if washed properly (as you have) and the swirls were buffed out, there is no reason for 80% of them to re-appear.

Back to your original question, I'm not really sure about the long term stuff. Have heard a few people have had bad experiences and no detailer will recommend it. Then again if they did, theyd be out of business :-)

yeah that 'glare' stuff .. I might be tempted on a new car/paintjob but I don't think it's worth $700 on a 10 yo paintjob with so many paintchips, swirls etc... might as well get an exterior respray for $1500 instead.

When you get your car polished how long it stays that way really all depends on the exposure to the elements and how often its washed.

You need to also remember that a Polish made in Europe or somewhere like that claiming 'lasts up to X months' might not work the same in the harsh Aussie environment.

For minimal to no swirl marks you need to polish by hand with a certain motion and use softer and softer applicators as you go.

And YES if you already have swirl marks they will reappear just like any other scratch you 'hide' by polishing it.

How fast the scratches and swirls reappear depends on the environment your cars in and the way the polish is applied and wiped off. (forget using a buffer if you hate swirl marks)

Delta you would be wasting your money with that product. They don't even show you photo's of before and after taken from the same position. how are you supposed to compare before and after?

post-a230233-z-image01.jpg

Here's your scratched bonnet....

post-a230234-z-image02.jpg

And if i put the camera way back here and on a completely different angle....

LOOK! no more scratches!!! :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...