Jump to content
SAU Community

Recommended Posts

umm just a look out peeps for a silver..possibly light blue or grey skyline....R31 with p plates and rego number starting with WWG***....This moron decided it would be cool to do some street drifting and managed to side swipe a white toyota hilux out the front of Direct Mix Concrete on Roxburgh avenue, Lonsdale this afternoon...The major problem being, He drove off straight away..Mate, if your on here, The police have your number plate and youve gotten yourself into more trouble by doing a hit and run....Come forward to the police and fess up so people like me that have similar cars in the lonsdale area dont get blamed first...

Thankyou

Link to comment
https://www.sau.com.au/forums/topic/276417-hit-and-run-skyline/
Share on other sites

lolz i had a tosser up my rear at glenelg once, thinking to myself might be a undercover cop i just made sure i drove extra safe n slow.

come to the round about turning right, he overtakes on outside and proceeds to hang it sideways. trouble is he went a bit too far out and to my call of "he's lost it" swung it back the other way and slamed into the parked cars. i went to pull over make sure he was ok and the dude just guns it off, so i went back later to suss the damage.

cops were there looking like a slight dent in 88 magna bumper bout $10 damage, about 10 witnesses that got his plate. so instead of fessing up paying for some cheap ass bumper he got police report saying drifting like a tool, hit and run :P justice served

lolz i had a tosser up my rear at glenelg once, thinking to myself might be a undercover cop i just made sure i drove extra safe n slow.

come to the round about turning right, he overtakes on outside and proceeds to hang it sideways. trouble is he went a bit too far out and to my call of "he's lost it" swung it back the other way and slamed into the parked cars. i went to pull over make sure he was ok and the dude just guns it off, so i went back later to suss the damage.

cops were there looking like a slight dent in 88 magna bumper bout $10 damage, about 10 witnesses that got his plate. so instead of fessing up paying for some cheap ass bumper he got police report saying drifting like a tool, hit and run :P justice served

i was down the bay on jetty road one rainy sat night with the missus when a guy in a white vr wagon did the same thing...got it spinning on the tram tracks and then lost it into parked cars out front of royal copenhagen then took off dragging half his front end on the road

i was down the bay on jetty road one rainy sat night with the missus when a guy in a white vr wagon did the same thing...got it spinning on the tram tracks and then lost it into parked cars out front of royal copenhagen then took off dragging half his front end on the road

Damn Bogans

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...