Jump to content
SAU Community

Recommended Posts

because i have got heavy fine for speeding to pay so i have deceide to sell my love,

Volk Racing GT7 Champagne Gold 19'x 10.5.

they are beautiful wheels for any GTR34 or skyline and Zs will need a spacer to fit on.

Price: $3200

comes with Dunlop DZ101 tyre 80% left only done 3000km on it, and the center cap

condition: few parking scratches on two wheels other two are perfect. weekebd driver!

the wheels are still on the car, but it can be take off any time. any buyer are welcome for inspection, LOCAL pick up perfer, will ship at buyer's expense

Contact: 0414598637(Kevin), CHATSWOOD 2067

5019_109871784840_510404840_1858483_925719_n.jpg

5019_109871789840_510404840_1858484_141387_n.jpg

5019_109872299840_510404840_1858491_2401137_n.jpg

5019_109874224840_510404840_1858499_7062647_n.jpg

5019_109874229840_510404840_1858500_5582444_n.jpg

5019_109874234840_510404840_1858501_315616_n.jpg

Edited by kevinisagoodboy
Beautiful wheels. Shame they are scratched to the shithouse.

I was going to buy them, unfortunately i had to give it a pass as soon as I found out about the offset and width

I've inspected them in person, the scratches aren't too obvious, and he's pretty honest about any imperfection

can't see the scratches unless you look up close, there aren't any buckles and the tyres are good.

Welcome to post if you have something nice to say, or if you're interested in buying them, but I thought what you've said in you reply was pretty rude.

omg... thatz sick... anyone know how much outside the guard on a GTT!?... or it won't fit?!

i think u might need to roll the guard to fits it...just need a little bit

any chance sum1 could photo shop these onto a a r33 gtr in midnight purple. they are hot rims mate

thx man they are really nice wheels, i dont know how to use PS, or is there anyone could help?

but im sure it will fits ur car very well~~~ :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...