Jump to content
SAU Community

Recommended Posts

i just want to know what to do before i can upgrade to a high mount turbo. Hopefully keeping stock internals if possible.

Fmic, 3 inch hks exhaust tyrbo back, upgraded suspension and slotted hd brakes. Boost controller, turbo timer, bosch 550 hp fuel pump. I know this car had a 500 hp engine before i got it now has half cut engine new stock turbo and gear box. I think the heads from old engine but not sure.

Cheers

Wayde

Link to comment
https://www.sau.com.au/forums/topic/277192-what-to-do-before-turbo-upgrade/
Share on other sites

i just want to know what to do before i can upgrade to a high mount turbo. Hopefully keeping stock internals if possible.

Fmic, 3 inch hks exhaust tyrbo back, upgraded suspension and slotted hd brakes. Boost controller, turbo timer, bosch 550 hp fuel pump. I know this car had a 500 hp engine before i got it now has half cut engine new stock turbo and gear box. I think the heads from old engine but not sure.

Cheers

Wayde

is that what you have or did you just answer your own question

Make sure you uprade the AFM with a new turbo. They tend to suck just that tad extra air lol. After my turbo upgrade when I had a PFC, I had to get a Z32 AFM to manage the extra volume of air.

clutch and diff will need to be done, but depends on power.... there are actually some dipsets out there that will highmount a 200rwkw turbo setup just for looks...

Wrong....

I have 312rwkw my diff is fine. A mate with the exact setup as mine has 364 rwkw and his diff is fine and has lasted 3 years now and still going.

Why would you get an upgraded diff for 200rwkw?

ok, so you are going to tell me that a stock diff is as good as a mechanical one for hi-power applications.... :rofl:

looks like every serious race car in the world has just wasted a bunch of money.... what idiots

have you ever driven a car with a mechanical diff? i'd guess not if you think that the stocker is fine for close to 400rwkw

i have the same power level you do and my diff was probably the best non power upgrade i have ever done

ok, so you are going to tell me that a stock diff is as good as a mechanical one for hi-power applications.... :rofl:

looks like every serious race car in the world has just wasted a bunch of money.... what idiots

have you ever driven a car with a mechanical diff? i'd guess not if you think that the stocker is fine for close to 400rwkw

i have the same power level you do and my diff was probably the best non power upgrade i have ever done

200rwkw is hardly a "high power application".

Don't go off tangents.

The person on this thread asked "what should I do prior to upgrading my turbo?"

At around 200rwkw (what a stock turbo is usually capable of pulling reasonabley safely), it WOULD be a waste of money to upgrade the diff. Standard diff is more than sufficient to support 200rwkw.... :D

Unless you can prove otherwise?

Wrong....

I have 312rwkw my diff is fine. A mate with the exact setup as mine has 364 rwkw and his diff is fine and has lasted 3 years now and still going.

Why would you get an upgraded diff for 200rwkw?

no to mention... if you actually READ my post you'd realise that i said the clutch and diff will need to be done depending on power level.....

the turbo is not mentioned, thus the power is at this point an unknown quantity... and at no point did i say a diff was needed for 200rwkw

what i said was that some people are stupid enough to highmount a 20rwkw setup for looks only....

also fwiw i personally would definately get a diff/weldy for 200rwkw... my rolla is currently having a 150rwkw build and it already has a welded diff

and a diff is never a waste of money... a weldy can be had for virtually nothing.

with the 4ac in my rolla putting out an epic 40rwkw you can STILL notice the difference with a locked diff

If you read his first post, you will notice he has the stock turbo on it............ :rofl:

so the point of this thread is what should he do before he upgrades his turbo to a stock on is it?

LOL

back on topic,

clutch

injectors

ecu

AFM

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...