Jump to content
SAU Community

Recommended Posts

Hi everyone, got a very interesting proposition for all of those R33 Skyline Owners out there with sunroofs who are wanting a 4 Point Half Cage for their R33.

I have spoken to David down at Brown Davis Automotive as I am wanting to purchase a bolt in half cage for my R33 which has a sunroof.

He will be using my car as the dummy and informed me that he can offer me a discount if I have 3 or more done all together.

These 4 point cages (half cage) are full CAMS approved and are powdercoated, have the harnesss bar running across the back and the diagonal bar running from top to bottom.

Price for one:

$1,100 fitted (letting them remove and refit all your trims)

$1,000 fitted if you remove the trims before you take it there

Price for 3-6

$800

Price for 6 or more

$700

Now, these are for R33 GTS-T WITH SUNROOFS! He said he can do the same deal for anyone who doesn't have a sunroof, as long he can use one car to do all the measurements.

Group buy will be running from 1/7/2009 untill the 15/7/2009 so please pm me with some contact info if you are interested.

Payment can be made directly to Brown Davis but I will need a deposit so I can give him the go ahead and produce these half cages.

If your uncertain you can give him a buzz and have a chat to him about the whole group buy.

If your from interstate we can still have these made for you and posted out to you at your expense.

They are located at 47 Holloway Dve, Bayswater, Victoria

http://www.browndavis.com.au/

http://www.rollcage.com.au/rollcage.html

Cheers

Dean

0403059467

Edited by DinoPanta
are the cages ADR approved?

could be interested in one without sunroof for r33.

Brown Davis cages are ADR, and more importantly - VicRoads approved.

Can't go wrong

also interested if it is a bolt on/removable cage. Is it steel or chromoly? brown davis do 2 types....

The FIA has banned CroMo from being used in cages, so if you want it to be legal in the future and what CAMS may implement in light of the FIA banning CroMo, best to stick with cold drawn seamless steel... CDS steel is also safer and cheaper so there's no reason to go CroMo, especially in a road car.

i noticed in the images that there is a 4 point cage in an xr6t that retains its back seat. i know its a sedan with heaps more room but will they be made to accomodate a back seat?

cheers...ben.

Would he want to do an R32 without sunroof? I would be tempted to sell my 7point cusco cage to go down this route...

are they bolt or weld in?

Edited by RB_Ryan
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...