Jump to content
SAU Community

Recommended Posts

Hi guys'n'gals

I have this elusive howling noise that i just can't seem to get rid off... and it seems to be doing funny things.

The main problem is that it doesn't seem to howl on the dyno anymore (where it use to) and you can't tell or it's harder to hear it when on the dyno, as opposed to in the car on the road. This is annoying, as we can't really check something when it's just not there (dyno)

On the street, the howl builds as boost builds and if you really give it some stick, something seems to "give" or "let go" before rev limit. Like a muffled whump, as if perhaps something is blowing off... but doesn't :D Hard to explain. First time it happened, i was thinking "that must be what it sounds like when a cooler hose blows off, etc", but everything is fine and in one piece :huh:

Ok, now the weird thing, one day was at the tuners, a loose hose was spotted, fitted it more tightly, tightened clamp and i went to take a test drive. The difference this time around is that i had removed the front bumper in case we needed to get access to the FMIC. When i took the car for a drive, without the front bumper it did not howl at all :D I'm like sweet, that loose hose must have been it, and we're all good. Get back, chuck the bumper back on, drive home and you guessed it... howl is back.

The front bumper has a fair whack of room around it on the inside, so it doesn't seem to be pushing up against anything,etc but i can't explain why no bumper would make any difference.

The other weird thing is that it won't howl on the dyno anymore, just on the road, which again, doesn't make much sense to me. (It has howled on the dyno before, but was easily audible)

It's near impossible for the tuner to fix because the only want to test/fix it is when it's on the dyno, but it won't howl on the dyno. Can't fix something that's not really there to begin with.

I'm trying to get the car ready for a track day on Saturday, but i'm not taking the car out as is as i'm concerned something might just blow up/off, it's a horrible sound.

Oh, and i've got a stock BOV, but i've noticed when you really give it some stick, and the howl ends up with that muffled "whump", the BOV sounds like a damn chapel st spec HKS, it's like sututututu... :blink: :blink: "sutututu" from a stock BOV?? Was under the impression that is a bad sound for the turbo...

I'll try and get to the tuners tomorrow, but would welcome any thoughts :)

cheers,

daniel

Well I guess when the car's not moving you don't get air travel through the bumper so it won't make any noise. I guess its not some thing to worry about. You should get a proper BOV before hitting the tracks.

Edited by kwickr33

it has howled on the dyno before, and i'm pretty sure it's not just air passing through the bumper because the noise is dependent on your right foot, not speed, if that makes sense. ie, i could cruise at 100km/hr and not hear anything, but put my foot down, wait for boost to build and it will make itself apparent.

that and i'll rack up the 'warnings' on my boost controller when it happens, and get 'peak warnings' when i get that muffled whump sound. Almost certain it's a boost related issue, as opposed to air around the bumper (which has never been an issue until we've started upping the power/boost on the car)

is there a certain level that the stock BOV out lives its usefulness? i thought it was fine for some fairly decent power

i have the same issue. but only because i removed my AFM to my intercooler piping to allow me to get a custom intake made up without the hassles of mounting an afm then filter. Im uncertain what the noise is but it is a slight howling sound, sounds like not enough air flow is making it to the intake or something. hard to explain.

wouldn't know how to check for manifold/gasket leaks

howl can get pretty damn loud and wouldn't have the foggiest about the belts

trying to get the car ready for a track day tomorrow, but just don't want to chance it...

went for a drive with bumper off, howl is there.

Came back, fiddled with and tightened up the pipe the tuner spotted one time (i think it's slowly working it's way loose) went for a drive, seem to have gone.

Bumper back on, went for a drive... doesn't seem like it's there. Let it cool, to come back and check pipe again...

Checked pipe, looks to not have moved... went for a drive, howly mc howl howl again - come back, completely loosen pipe/clamp, shove in, tighten up.

Go for a drive, slightly better but not my boost controller is beeping at me which i guess means something is spiking a bit and my BOV is still thinking it's on chapel st.

so combo of BOV and howl, going to have to skip the track day tomorrow :)

at what power/torque would we be expecting the BOV to give up?

I have had a howling/screaming when on high boost/revs for a while too, have just been fitting some extra goodies around exhaust section & noticed loose bolts on exhaust manifold, maybe worth a check on yours too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
    • @Stringycheese  Have you only gone to the one blue slip workshop?  There will be a heap of them where ever you live, good odds that the next place you go to will pass the car.  Unfortunately (or fortunately?) every blue slip / engineering workshop will be different and will be happy passing or failing different things - despite working from the same set of rules. It's kinda like 2 lawyers arguing over a piece of legislation, each saying their interpretation is correct. Might seem strange that this happens when it comes to getting a modified car passed, but this is very much a thing. A big part of the game is finding an engineer / workshop that is on the same page as you.
    • Bah. I daily mine. ~60km per work day, 10-12 thousand km per year. What's the point of having a dirty old Datto and leaving it in the shed. It needs to be driven and enjoyed while the govco allows us to do so. It will only be a few years before we're forbidden to even start up internal combustion engines.
    • Judging by that spring perch and the normal looking spring on it - not a coilover. Well.... it is a coilover, just a stock format coilover, rather than what everyone calls a coilover.
    • Yes it is. We get stock from Nismo directly. I'm happy to take photos/video of it as proof before I ship it with timestamps or whathaveyou.
×
×
  • Create New...