Jump to content
SAU Community

Recommended Posts

Howdy,

My M35 didn't come with a cargo barrier so I'm just wondering what my options are.

Firstly, if I was to source a factory one from japan, does anyone know roughly what price I'd be looking at?

Is it worth getting one made to fit locally instead?

I want one that is removeable. I was happy with the factory one in my s2 - I presume the M35 factory one is similar to that as I have similar hooks in the roof etc to clip it to.

The other thing I'm missing is the shopping cover - although I can probably live without that one since the windows are dark enough you cant see in the boot anyway.

Would be interested in hearing from anyone who has had a cargo barrier put in, or bought a factory one separately...

Cheers :(

Link to comment
https://www.sau.com.au/forums/topic/277946-m35-cargo-barrier/
Share on other sites

IM for the shopping cover.

I don't have one Steve, sorry... but you could always get RHDJapan to list the price of a new one if you don't want to go 2nd hand on IM.

RHD have better pricing on quite a few items (Nismo thermostat cost me $55 less for a new one delivered to my workplace through RHD than it did to get a second hand one via IM)... having said that, some of their stuff is ridiculously prices (Nismo bodykit for example).

May not be suitable for what you want, but I got one of those cheap(ish) ones that just extends to wedge itself between the floor and the roof from Autobarn. I realise it's not terribly strong (it's aluminium, not plastic), but it's only indended for keeping the dog off the leather. We're always taking it in and out to get the bikes / bed / other stuff in the back, and it's much more convenient than having to break out the spanners every time.

Was only $60 or something I think.

The factory one is quite clever with it's design.

* It can be extended to fit in to different locations in the boot. (telescopic)

* It can be stored either under the floor or as a basket below the roof.

* On either end the end caps are slotted so it can be locked into the trim on the outside linings of the boot. If you have a look in the fold out clips you will see that inside each clip it narrows and the barrier locks into this slot.

* it has straps in on the lower edge so it can be held in place using the loops on the floor.

If you can get one it is very good.

wonder if it's possible for nissan Aus to bring them in

Apparently not.

I gave FTG Nissan the part numbers for a price quote on the cargo barrier (H4935-AQ000) and the M35 car cover (K9001- AQ000), but was told if it is an accessory it cannot be brought in by a Nissan dealer as they are sourced locally in Japan and not "made" by Nissan.

Would be great if any of you guys would like to try Hornsby Nissan, just to double check that this is correct.

(Once I told him that I got the part numbers from my version of FAST, he was not happy so I figure I may not have been supplied with correct info)

Thanks for all the replies!!

I'll have another look under the boot but I'm well aware of the different sections under there and haven't seen it before - but I haven't been looking for that when I've had the floor pulled up either...

Is it in where the spare wheel is or is it in the other section further forward where the tools etc go? or maybe there's a 3rd compartment I wasn't aware of.

Failing that I will try to get hold of a factory one somehow. Was hoping to have something within 4 weeks (driving to adelaide) which probably wont be possible if i'm importing one...but we'll see how we go.

Out of interest is it something any importer would be able to source easily? I know the guy I imported my car through and he has offered to get me any parts I might need too - might be worth asking if he can get hold of this. If I have any luck I'll let you guys know.

it sits across the entire floor under the main floor section and the little side bits. youll know it if its there!

seriously if prices through those other people are expensive. try import monster. ive seen both beige and black colours in the last few weeks on there. and they will get it into the country within about 4 days.

it sits across the entire floor under the main floor section and the little side bits. youll know it if its there!

seriously if prices through those other people are expensive. try import monster. ive seen both beige and black colours in the last few weeks on there. and they will get it into the country within about 4 days.

sounds good, thanks!

try import monster. ive seen both beige and black colours in the last few weeks on there. and they will get it into the country within about 4 days.
sounds good, thanks!

You may want to confirm that it can be shipped via air.

You should be fine, bit it may be too long.

I just questions as I see it as between a strut bar and a front bar in size... and you cannot Air ship a front bar unless it is chopped in half.

(Especially poor is when you miss the container cutoff time by less than 2 days... D'oh!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...