Jump to content
SAU Community

Recommended Posts

Assuming that i replace the ECU with a megasquirt or similar(sorry i didnt mention that bit in the first post lol).

Ive just been told(correct this if it is wrong) that the fuel pump is running near capacity when tuned to stock settings and must be replaced to run any higher amount of flow, just wondering if this applies to the injectors as well?????

well if an injector is installed on an engine designed for 109hp, and you want to increase that power by anything noticeable, you will need to upgrade the injectors.

there are threads discussing this

making a L24e go any better is not an easy thing to do, most cases the factory tuning will slow you down, as its the major restriction in modification

you could go the 'pod filter, advanced timing, extractors and exhaust' deal, but there wont be any drastic changes at all

the best thing is aftermarket management, or convert to another factory type, like the delco 808, or a nissan ECCS

turboing will make some good results, not cheap but can be done, the factory management can be tricked to some extent, a bit dodgey but can be done (wouldnt go past 4 or 5 psi though)

Im convinced the cheapest way to get an R30 to go quick is an RB30e conversion, or turbo the L24

Thanks for the replies everyone,

As i dont really want to do an engine transplant ill look at the turbo option(sure there are already lots of threads dealing with that so ill do a search)

Cheers

Michael

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...