Jump to content
SAU Community

Recommended Posts

Hi guys

Planning a ski trip to Mt Baw Baw :laugh: Taking the R34 GTR with its AWD for the 1st time. Apparently even though I've never used them, it's mandatory to carry snow chains, otherwise they won't let you in the resort.

The snow chain hire places should have sizes for stock rims yeah? Does the resort staff actually check every car to see if you have them? On the few trips to Mt Buller they never did. I don't mind hiring the chains, I am just hesitant to put the chains on and scratch the hell out of my rims.

Has anyone had any significant damage from chains? I was wondering if places sold/hired chains with the plastic sleeving over the rim part to minimise damage. That would be an easy solution without going buying the ultra-expensive plastic snow chains you can find online. Any suggestions would be appreciated, thanks.

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/
Share on other sites

put tape on your rims before the trip,

so that if you get metal chains they rub on the tape and don't damage wheels

i've seen people tape their whole front of the car, when going for long trips, to avoid chips in paint and bugs splatered on paint

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4704591
Share on other sites

^^

What West said. Given the option though, I would not put chains on my LMGT4's. I'd do my best to beg borrow or steal a car more suited to the trip :P

good idea!

Phatboy I have a Hyundai Getz I will glady swap for the GTR for your snow trip :(

Make sure you bring it back with a full tank of petrol cause Im doing a favour for you :)

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4705028
Share on other sites

I went to Baw Baw last yr thinking that i didn need chains... So i just chucked some dodgy chains in the boot that i had lying around just in case someone stopped me.. Paid to get in, and never made it up the mountain, was so icy and snow covered the car was just slidin everywhere... Its a pretty steep incline so u really need them if 2WD.... There is noooooo way i would put chains on a R34 but if u just put it onto full AWD u will get up easy... WRX's without chains where doing fine gettin up...

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4706152
Share on other sites

went baw baw last season

you definitely need chains

the incline up the slope is pretty steep and it doesn't seem like they clear the roads properly so its covered in ice.

had a lot of trouble last year with a fwd mazda3 with chains getting up.

i would suggest taking a different car up there, as the car will be prone to damage from various factors.

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4706441
Share on other sites

not sure with baw baw chain hire but when i went to mt bullar last year mate had 18's on his car. that actually asked for width size and tyre profile best suited. they even came out and showed us how to put it on and the chains were no where near the rims.

you GTR rims will be fine. just make sure you get proper chains that has the plastic tubing around the out wheel area as that gets the chain sitting nicely.

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4706593
Share on other sites

Thanks for all the replies. Unfortunately the only other car available to me is a Mazda2 which likely doesn't have enough power to make it up the mountain when icy with 2 passengers and ski gear even with snow chains fitted.

I've heard snow tyres apparently don't work as well as chains. They would be more of a hassle to get on anyway.

Anyway, will ring around the mountain and see if anyone's leasing snow chains specifically for wide, low-profile rubber with decent rims. My suspension is stock, so hopefully clearance won't be an issue.

Cross my fingers that 300 awkw in a heavily laden vehicle will be enough and the chains will stay where they belong next to the subwoofer in the boot :blush:

put tape on your rims before the trip,

so that if you get metal chains they rub on the tape and don't damage wheels

What kind of tape? Just normal duct tape? Hmmm... might have to look into this as the easiest option.

Phatboy I have a Hyundai Getz I will glady swap for the GTR for your snow trip :(

Make sure you bring it back with a full tank of petrol cause Im doing a favour for you :)

LOL. BP98 ok?

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4706739
Share on other sites

What kind of tape? Just normal duct tape? Hmmm... might have to look into this as the easiest option.

We use 50mm wide tape for line marking at work, its like duct tape, but does not leave as much sticky residue

it also comes in a range of colours, as far as i know it comes in: blue, red, yellow and white coz that is what we use at work

sorry i don't know the brand, but i'll be at work later today and can have a look

it costs something like $8 per roll and is around 15-20m

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4706872
Share on other sites

Thanks for all the replies. Unfortunately the only other car available to me is a Mazda2 which likely doesn't have enough power to make it up the mountain when icy with 2 passengers and ski gear even with snow chains fitted.

Why not the Mazda?

I take a 1.5lt manual Colt to Buller twice or three time last year.

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4707042
Share on other sites

Seriously,

The whole idea of owning a car that you love, a gtr for instant, is to be able to take it with you everywhere, enjoy the drive and not to leave it in the garage cover up or avoid increasing milage or offcourse unless its a dedicate Track Car or such.....!

I've taken my old 33gts, 32gtr to the snow many time.........but that's just me though.

post-1327-1247205950_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4707267
Share on other sites

Its a $2200 fine for not carrying chains above the snow line (even if you have a 4WD car and don't need to fit them).

A friend of mine has used two circles cut out of one of those blue sleeping mats and he swears by it.

For sizes, the link below is the sizing chart for Konig chains (one of the most popular brands). I got some for the Stagea last time I went up in size 100 to suit 235/45R17 tyres and there was no problem with availability. My wheels are the RS4s/R34 GTT 17x7". But I'm glad I didnt have to fit them as I'm sure they would have rubbed on my guards and hit the seat of the shocks. You might struggle with anything bigger though. I'd recommend ringing ahead.

http://www.snowchains.com.au/sitebuilderco...igcarchains.pdf

That said, which wheels have people fitted chains to on ATTESSA equiped cars? My (poorly translated) Stagea owners manual mentions to only fit them to the front wheels, then in the next section contradicts itself and says only fit them on the rear wheels. I think it might be a translational error and the rear wheel fitting refers to 2WD Stageas. I would imagine that fitting the chains to the front wheels is the way to go.

Link to comment
https://www.sau.com.au/forums/topic/278409-snow-chains/#findComment-4707339
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...