Jump to content
SAU Community

Recommended Posts

Hey,

I'm currently parting out a R34 Skyline Sedan.

Here's some of the parts currently up for grabs. Please DO NOT ask me to ship any large parts as it'll cost an arm and leg to ship from NZ - AU. :blush:

PM me if your after any other parts

NOTE: All prices are in AU dollars

A) Airbag system (complete) Tiptronic steering wheel / Passenger airbag / Airbag computer $500

B) Air con unit (damaged face plate but still working fine) $60

C) A pillar trim + boost gauge (not branded) $80

D) Centre dash vent $80

E) Centre console (with leather lid / compartment) $120

F) Complete set (5x) seat belts inc. bolts and buckles $200

G) Door sill trims $80

H) Speedo cluster surround $60

I) Tiptronic shifter surround + ash tray $80

J) Tiptronic cluster, approx 110,000 km's $150

K) Left / Right Non-Xenon headlights (left headlight has some small lines) $1000

L) Left / Right wing mirrors $160

M) Monsoon / whether shields / wind deflectors (left rear is cracked but glued back) $100

N) Rear wiper + motor + loom $100

O) Tail lights (tinted lenses) $160

P) JBL Speakers + Tweeters (6.5" / 2-way / 75W RMS / 225W peak) $160

Q) Glove box $80

A) airbags.th.jpg B) airconunit.th.jpg C) apillartrimboostgauge.th.jpg D) airconvent.th.jpg

E) centreconsole.th.jpg F) seatbelts.th.jpg G) doorsillcovers.th.jpg H) clustersurround.th.jpg

I) tiptronicshiftersurroun.th.jpg J) cluster.th.jpg K) 48396374.th.jpg p1000506.th.jpg

L) 83223873.th.jpg M) winddeflectors.th.jpg N) rearwiper.th.jpg O) 70568454.th.jpg

P) jblsoundsystem.th.jpg Q) 42715815.th.jpg

Edited by Chang

Alright here's what has been sold thus far:

- R34 Headlights SOLD

- R34 Left window switch SOLD

- RB25de Neo ECU SOLD

- All exterior badges SOLD

Everything is still up for grabs :P

Edited by Chang

Hi mate, can I just take the arm-rest and handbrake leather cover separately? Do they fit on 2 doors GTT? If u do post, plz PM me the price including post to SA 5072. Need them asap! Cheers! :(

hay buddy

how much for just the ash tray (no surround just the ash tray)

and the a/c control plastic cover (just the cover please mine cracked when i took it apart for paint dont need the buttons and actual unit from behind it)

sent to 3032 melbourne

cheers

julz

Rear wiper + motor + loom SOLD

Tail lights (tinted lenses) Payment Pending

Still heaps of parts available. Just ask :down:

Edited by Chang

A) Airbag system (complete) Tiptronic steering wheel / Passenger airbag / Airbag computer $500

C) A pillar trim + boost gauge (not branded) $80

D) Centre dash vent $80

E) Centre console (with leather lid / compartment) $120

F) Complete set (5x) seat belts inc. bolts and buckles $200

H) Speedo cluster surround $60

I) Tiptronic shifter surround + ash tray $80

J) Tiptronic cluster, approx 110,000 km's $150

M) Monsoon / whether shields / wind deflectors (left rear is cracked but glued back) $100

O) Tail lights (tinted lenses) $160

Q) Glove box $80

B) Air con unit (damaged face plate but still working fine) $60

G) Door sill trims $80

K) Left / Right Non-Xenon headlights (left headlight has some small lines) $1000

L) Left / Right wing mirrors $160

N) Rear wiper + motor + loom $100

P) JBL Speakers + Tweeters (6.5" / 2-way / 75W RMS / 225W peak) $160

Stereo surround + brackets

RB25de Neo ECU

All exterior badges

Car will be sold this weekend. So any other parts that are not listed here, it'll be your last chance to ask. :merli:

Edited by Chang
  • 3 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...