Jump to content
SAU Community

Apex Fc Commander Pro

raps86

By raps86,
in Engines & Forced Induction

 Share

Recommended Posts

raps86 Rising Star

raps86

Posted
Posted

Hi i was wondering if people know where i could buy this product as the only place that i have found is from access autoworks but im trying to see if there are other places that would sell it aswell. This is the product that im after http://www.accessauto.com.au/Items/ap-415-...or%20Power%20FC and im not after the datalogit. Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/278667-apex-fc-commander-pro/
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

the apexi software requires activation, and you can't xfer it, its got stupid protection built into the program

you would be by far better off with datalogit. ive got the japanese version of the apexi fc pro and its nothing special

datalogit seems to be more flexible and give you access to more things, although datalogit is not perfect (some little interface annoyances etc)

i would recommend finding datalogit 2nd hand

if you really really want the legit apexi one, go for it, but be aware of its built in activation and copy protection

i tried to break around it just to see what it looked like before considering buying it, but no go

so can only view the japense version and its mangled characters everything but you get the jist of the program

paulr33 Grand Master

paulr33

Posted
Posted

apexi powerfc pro software

apexis legit product, lets you tune via a PC/laptop and edit all the usual stuff, plus you can edit AFM curves (cant do via hand controller)

datalogit

3rd party product, lets you tune via a PC/laptop and edit all the usuall stuff, plus you can edit AFM curves (cant do via hand controller)

hand controller

the usual tool that most people use

there are a few other clones floating around to do the same job as datalogit, one of them is fc tune, google it

and there are a few others but cant think of their names, from memory none of these are in production stage, just testing/hobby stage

out of all the options, datalogit is my choice

raps86 Rising Star

raps86

Posted
  • Author
Posted
Raps - Any reason for not wanting datalogit?

its not that im against the datalogit a friend that has help me out before has both the datalogit and the apexi fc pro on his laptop and said the apexi one is beter to use. Thats why i was looking into it. But if there isnt much difference in them i might look into the datalogit so we can get my car retuned.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • joshuaho96
      Automatic Power Button Light Flashing

      By joshuaho96 · Posted

      Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...