Jump to content
SAU Community

Recommended Posts

Hey guys,

Haven't been around for a while, im mostly from NA anyways :D.

Besides that im getting rid of my R34 25GT and instead of going for the GTT i want my dream ride now, R34 GTR.

I've checked out a few rides that are on Carsales at the moment and my budget at the moment is between $40k - $45k.

First option would be to buy it in Aus, but if i dont find something i like i would most likely look into Importing.

Anyways,

I just need a basic buyers guide or "What to look for" when looking for a neat R34 GTR with no headaches in the future.

Since you guys would know most about the R34 engine itself, more so of the RB26DETT I need some help on some common problems that occurr on the GTR and what to look out for. :D

Any help would be nice, and if this is in the wrong section for any reason, please move :)

MRXTCZ

P.S Did a quick search before posting and hardly found any info so this could potentially be a sticky for future GTR buyers :yes:

Link to comment
https://www.sau.com.au/forums/topic/278941-r34-gtr-buyers-guide/
Share on other sites

Hey mate,

I found this link to be very helpful when I bought my first R33.. no-where near as nice as a R34 GTR though lol.

http://www.skylinesaustralia.com/forums/bu...e-f-t35129.html

Once you find one that fits your criteria, Take it to an import workshop and get them to do the once over for you.. it will cost you a couple of hundred but might save you thousands..

Cheers and all the best.

Johno

^^ hahaha, or lots of mods :D

the Chef does have a good point though, with that budget, you're leaving yourself thin on the ground in case something goes wrong. The budget would seem to indicate the cheapest possible end of the R34 GTR market?

at the moment Chef, what would you budget for a nice example out of Japan?

Well i have funds for the actual insurance and running costs.

The $40 - $45k budget is just for the car alone, and yes it is on the bottom end of the GTR market, but i have seen some good examples which are <$50k

MRXTCZ

I dont know if you will agree with this but my theory with cars is always to choose the best model (or close to) in the range as it is your 'dream' car do you really wanna settle for a basic series 1 r34 GTR when the extra toys in the 01+ models are worth more than the sum of its parts.

You could have a series 3 r33 gtr which is the best and final ones to roll off the line or a basic r34 gtr; you will be happy for a little while but once the novelty of owning the car wears off, you will want the better version.

I was gonna import a basic one but after reading the forum and thinking long and hard i decided to buy one of the newer ones cos i liked the new interior and the carbon parts.

Completely your decision just though id add what i was thinking at the time and what i did.

-Johnny

After reading the article from "The Clipping Point", It has made me very curious on the Vspec Model.

I would love to find a nice looking Vspec II or even just a Vspec.

In a car, its the little novelties that make it worth while for me, keeps me entertained lol.

MRXTCZ

Thanks for this topic and help guys - very useful.

I'm only a bit worried about this mention of engine rebuild at 100,000kms, that seems awfully low - wondering if forum members have had some experience with this.

Thanks for this topic and help guys - very useful.

I'm only a bit worried about this mention of engine rebuild at 100,000kms, that seems awfully low - wondering if forum members have had some experience with this.

I highly doubt that unless its been modded/tuned really poorly or tracked all the time.

The engine is quite strong, able to make up to 800hp on stock internals (granted not for long) but if it is strong enough to take that punishment then im sure a lightly/properly tuned rb26 would do the 100k.

Thanks for this topic and help guys - very useful.

I'm only a bit worried about this mention of engine rebuild at 100,000kms, that seems awfully low - wondering if forum members have had some experience with this.

i think you're getting confused with that bullshit R35 100K tear-down rumour

Yeah i've not heard of a 100,000km rebuild for a RB26 as being common with the everyday car.

MRXTCZ

Its what it said in one of those buying guide links, the clipping point link - I also find it very surprising since RB-26 is known as a strong engine. I'm not taking much attention to that. If the owner takes care of his RB26DETT powered beast, and does not abuse it I would be very comfortable with a 100,000kms "old" one.

Edited by rehab2010

You can have an RB rebuilt at 20,000 or 200,000kms. It all depends on how the motor was treated. Back to your pursue of happiness, try and get at least a V Spec. There's a lot more bits and pieces added to those models. Some that I can think off top of my head.

- rear carbon composite diffuser is so nice to have

- front plastic diffuser

- 2 more readouts on the MFD, intake temp and something else shit I should know this..

- different tuned Attesa system

- more active diffs

- finned rear diff cover for better cooling

I would have loved to own a VSpec II as the updated interior and carbon bonnet is so nice to have, but in the end I found a purple Vspec that I could not resist. Plus, saving myself at least 10 grand that I could spend on wheels, exhaust, turbos, etc.

Imo, there's a huge difference between a standard and VSpec car, but not that much difference between a VSpec and VSpec II, so my suggestion is to find a nice VSpec and have some dollars left over for your first stage mods such as rims, coilovers and exhaust.

Can anyone advise if it is possible to differentiate V-Spec/V-Spec II and the normal GT-R's using VIN or something else. I understand that V-spec/II has a CF rear diffuser tray as a biggest differentiator, but it is so easy to fit that to a non V-Spec/II one and sell it as V-spec to unsuspecting buyer.

Can anyone advise if it is possible to differentiate V-Spec/V-Spec II and the normal GT-R's using VIN or something else. I understand that V-spec/II has a CF rear diffuser tray as a biggest differentiator, but it is so easy to fit that to a non V-Spec/II one and sell it as V-spec to unsuspecting buyer.

It's not easy to replicate the extra 2 sensors on the mfd, someone has tried to do it before and he found out it was a headf**k to do it. Another easy easy thing to check is the rear diff cover. If it's finned it's a real VSpec. If not then you know it's not a real VSpec. Not many people can be bothered to change that part.

Edited by mxfly

So there are 2 extra displays on the Vspec, hmm ..

Well now if thats a mission to add on a non-Vspec then i guess thats what im gonna' be looking for to differentiate and uncover a real Vspec compared to a wannabe :P

My aim of getting a GTR would be in January / Late December.

If im going to be sinking close to 50k into a car, i want to make sure i get the one which i really love.

MRXTCZ

Vspecs also has some little things different like aluminium pedals n no drivers side handle lolz dunnno why

100% always get a compression test on any car you buy + leakdown inspection....again all this stuff is covered in quite a few guides ive read on here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...