Jump to content
SAU Community

Recommended Posts

Old stuff need to clear out.

GTR Turbos r33 1998 ser3 52xxxk's perfect condition, when I imported my car they came straight off and bigger ones went on car was stock and non boosted. No oil lines on Turbos I used them on the new ones what ya see in the pic is what you get.

$450 ono

post-51272-1247471782_thumb.jpgpost-51272-1247471826_thumb.jpg[at

tachment=234290:gtr_r33_turbos5.jpg]post-51272-1247471903_thumb.jpg

GTR Turbos r32 1993 120xxxk's suit hi-flow, one ok but other got no exhaust wheel. No oil lines and no aquators.

$150 ono

post-51272-1247471694_thumb.jpgpost-51272-1247471719_thumb.jpg[at

tachment=234287:gtr_r32_turbos3.jpg]

GTR r33-r32 stainless steel front pipe, used for a few dyno passes and went a different system.

$120ono

post-51272-1247471648_thumb.jpgpost-51272-1247471661_thumb.jpg

GTR stainless manifolds, used for a few dyno passes went different setup. Perfect condition and flow great no idea what brand, all flanges where machined flat spent abit of money getting them perfect and abit of porting. They where wrapped that why the colour is off.

$400 ono

post-51272-1247472061_thumb.jpgpost-51272-1247472077_thumb.jpgpost-51272-1247472099_thumb.jpg

Catch can universal alloy, test fitted never used.

$50 ono

post-51272-1247471529_thumb.jpgpost-51272-1247471550_thumb.jpg

GTR cluster r33 1998 ser3 52xxxk's perfect condition.

$300 ono

post-51272-1247471617_thumb.jpgpost-51272-1247471632_thumb.jpg

R33 gtst stainless steel catback, 3 inch to 3 1/2 inch, slight dent in rear part as tried to fit to gtr and dented it to try clear the rear support bar, front pipe been used but rear hasn’t.

$300 ono

post-51272-1247471955_thumb.jpgpost-51272-1247471997_thumb.jpg[attachme

nt=234295:r33_catback3.jpg]

10" thermo fans, used for a few dyno passes. Comes with mounting clips to will sell as pair only.

$80 ono

post-51272-1247472125_thumb.jpgpost-51272-1247472157_thumb.jpg

DR30 right hand headlight, can’t remember why I have it but it’s in good condition no cracks and don’t know what their worth.

$120? Offers welcome.

post-51272-1247471574_thumb.jpgpost-51272-1247471588_thumb.jpg

post-51272-1247471750_thumb.jpg

post-51272-1247471855_thumb.jpg

post-51272-1247472025_thumb.jpg

Price change

r33 turbos $350

r32 turbos $75

r33 catback $250

gtr r33 cluster $200

thermo fans $50

gtr front pipes $100

gtr manifolds $300

dr30 lhheadlight $80

yeh the cluster is non v-spec.

the r33 gtr turbos will fit the r32 gtr fine and not sure if there is any differnce i wouldnt think there would be, there just newer and done low k's

Edited by Travis Trayhern

no idea on rebuild costs,

chuckie: i have replyed to both of your pm's if you not getting them send me email on [email protected]

front pipes sold pending payment.

thermos sold.

dr30 headlight sold

gtr cluster sold

catch can sold

front pipes sold pending payment.

R33 gtr turbos $300

r32 turbos $70

r33 catback $250

gtr manifolds $250

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...