Jump to content
SAU Community

Recommended Posts

So my R32 has 18" wheels and the tyres are 40 profile

The R32 came with 205/55 R16

The rules as per QLD at least state

"The rim diameter may be varied from the standard size

but the overall diameter of the tyre must not vary by

more than +15mm or -26mm."

so if I have 245x40 R18

18 x 2.54 = 45.72 + 4cm = 49.72cm

and stock

16 x 2.54 = 40.64 + 5.5cm = 46.14cm

49.72 - 46.14 = 3.58cm or 35.8mm

am I doing something wrong or is my car currently not legal?

Link to comment
https://www.sau.com.au/forums/topic/279124-is-my-car-legal/
Share on other sites

agreed with Bubba, it is a percentage measurement.

using the calculator that Bakes supplied above - yes the difference is 22mm which according to those QLD laws is ILLEGAL for you.

however, if you were to fit 235/40/18 tyres on the same rim - the overall diameter increase would be 13.47mm = LEGAL :iluvff:

so moral of the story, fit 235/40/18s and you'll be all sweet :D

Link to comment
https://www.sau.com.au/forums/topic/279124-is-my-car-legal/#findComment-4718721
Share on other sites

agreed with Bubba, it is a percentage measurement.

using the calculator that Bakes supplied above - yes the difference is 22mm which according to those QLD laws is ILLEGAL for you.

however, if you were to fit 235/40/18 tyres on the same rim - the overall diameter increase would be 13.47mm = LEGAL :thumbsup:

so moral of the story, fit 235/40/18s and you'll be all sweet :yes:

wow, thanks for that i just learnt something. so i'm 1/2 legal, just need to sort out the rears which are bald anyway.

Link to comment
https://www.sau.com.au/forums/topic/279124-is-my-car-legal/#findComment-4721749
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...