Jump to content
SAU Community

Recommended Posts

can someone explain to me what bits u need for a hid kit?? as i'm also interested in maybe getting some ... i know u need globes and also that other things that connect to it ... and also do they just fit on the H1 mount?? i had a close look at some and it appears u might need a spacer of some sort ...??

Link to comment
https://www.sau.com.au/forums/topic/27989-hid-kit/#findComment-582944
Share on other sites

Anyone know if HID bulbs is hotter than normal H1 bulb? Is this safe for skyline's plastic headlight cover, i.e. not gonna make it turn yellow or melt down?

BMW uses HID as factory standard.... if non factory upgrade is told illegal, I'm sure you can do engineer certificate on them...

Link to comment
https://www.sau.com.au/forums/topic/27989-hid-kit/#findComment-584211
Share on other sites

OK I'll clear a few bits up. Yes they are illigal IF your car doesn't have a lense cleaning system eg. BMW, Merc etc. Thats why u see these cars with them on. My 34 is dues on the 6th and I have to remove the HID lights from it because they don't comply to ADR standards - no washing etc. The reason for the washing is due to the fact that they are such a bright light. If you get water and muck on the lense they say it's possible to refract and blind oncoming driver (whatever). If you really wanted to spend the money I'm sure you could get them engineered but c'mon really, how many ppl can?

Link to comment
https://www.sau.com.au/forums/topic/27989-hid-kit/#findComment-584259
Share on other sites

hang on a minute, something struck my mind....

is another compulsory thing for HID is self-levelling system in the headlight? this is to prevent your headlight blinding oncoming drivers when you are, say going uphill, etc... its not only about whether the lens is dirty or not...?

Link to comment
https://www.sau.com.au/forums/topic/27989-hid-kit/#findComment-584290
Share on other sites

Originally posted by rs73

hang on a minute, something struck my mind....

is another compulsory thing for HID is self-levelling system in the headlight? this is to prevent your headlight blinding oncoming drivers when you are, say going uphill, etc... its not only about whether the lens is dirty or not...?

Yes this is also true - they need to be self levelling, most of the 34 kits come with an in-cabin switch for manual level adjustment but this is obviously not goo enough for the ADR's...

There is another company here in Oz called xenall who also do hid kits for most cars ;)

www.xenall.com.au

Link to comment
https://www.sau.com.au/forums/topic/27989-hid-kit/#findComment-584708
Share on other sites

hey,

will the 4500K HID light be as bluey bright as the Bimmer ones? Or will they be more whiteish? Are the bluey ones starting to get into the 8000k range?

cos based on the Taka Kaira prices, a pair of say 6000K HIDs would cost us around AUD 521. Which is heaps more affordable than AUD 1000+

Link to comment
https://www.sau.com.au/forums/topic/27989-hid-kit/#findComment-585158
Share on other sites

  • 1 month later...

Errr... Guys, you can't just buy the HID bulbs and plug them in you know? So if you went and bought those two HID bulbs for $300, you would have just flushed $300 down the toilet. Instead, consider donating $300 to the forums :P

(See this thread: http://www.skylinesaustralia.com/forums/sh...read.php?t=4845)

But yeah, you need a ballast unit, and a new wiring loom, to connect the ballast to power, and also from the ballast to the new bulb.

This is why they sell kits. You can't just buy the bulbs and plug them in.

Link to comment
https://www.sau.com.au/forums/topic/27989-hid-kit/#findComment-614980
Share on other sites

So HID "kits" are basically selling you a few bits of wire, some basic inverters and some expensive globes.

For $1000???

Seems like a joke. You can build everything you need except the globes yourself if you are handy with a soldering iron. There's probably about $6 in parts in your average ballast/inverter.

Link to comment
https://www.sau.com.au/forums/topic/27989-hid-kit/#findComment-615046
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...