Jump to content
SAU Community

Recommended Posts

Hey guys.. couldnt find the tech help section.. so i figured this would be the best spot.. kinda..

I have an R34 GTT, recently i thought my water pump had died on me as i was getting no water flow through the top radiator hose, the top hose would be hot, the bottom hose would be cold.

So i took out the thermostat all together and tried again.. yet again no water flow.. so i got a hose stuck it in the bottom hose, water comes out the top no problem, vica versa still OK.

Swapped the water pump + thermostat on the weekend to an Rb30 item + Nismo thermostat, while at it i swapped my rad hoses to Silicon items aswell.. (mate told me my factory water pump still looked OK, it only had the slightest play in it, blades all ok)

Now by no means am I a mechanic, so i could be missing the most BASIC thing in the world. I've filled it up.. and yet again it seems like no flow. I idle the car for about 10 minutes and you can feel the pressure building in the hoses (as normal.. kinda..) and then the rad cap opens up to let the boiling water out of the overflow hose.. obviously at this point i turn the car off and let it cool down..

PLEEEEASE help me.. so confused and have no idea or reason i can think of as to why its overheating SO easily.

Also, if anyone knows, does ALL the water from the engine HAVE to pass through the turbo water lines, mine look abit small (Apexi turbo swap) and if it has to all go through the turbo i think that could POSSIBLY be the issue..

Edited by illusiVe

Sounds like the Radiator is blocked. Actually, it seems obvious. If you have changed everything bar the radiator and its still doing it...

PS Nismo thermostat is only causing you more harm than good.

radiator seems to hold pressure no problems.. its only when the car is getting damn hot im getting steam outta the overflow hose.. at which point i know its too hot..

if it is the radiator it'd have to be a DAMN tiny hole.. cause i dont see any steam ever coming out of it itself, nor water

i can get water through the radiator no problems with just pouring water in the top pipe, it comes straight out the bottom pipe of the radiator.. imho it also wouldnt explain why i dont get water coming out of my top radiator hose =(

ill still doublecheck + swap the radiator tonite.

Edited by illusiVe

It's not going to be the turbo water lines.

Now what temp are you getting on the cluster? Is it actually moving off half way and towards hot? You might still have a bad radiator. Just because you put water in the top and it comes out the bottom doesn't indicate it's good unfortunately, the core can be flowing poorly and water will still flow out OK. Have you been running coolant in it?

I would remove the radiator and take it to a radiator place to be check and cleaned. Failing that you may need to look at a possible head gasket problem, of which the symtoms can be found on here by searching.

Get the rad properly checked out first but, re-fit it then move on from there.

thanks james.

yeh the temp cluster moves up towards high.. but in my 3 years of owning it until this issue happen'd i had never seen it go past half way. I have always ran coolant in the system, however since the issue im just throwing water in until i can fix these stupid gremlins.

Can you just throw me a basic reason/s as to why it could be headgasket related?.. just cant make sense from it.

after talking to a mate, apparently RB's have a bleed valve somewhere near the intake mani? (plz confirm) which u need to open to get all the air out...

i have no idea where this is or what it looks like (i know what an intake manifold is though!) if anyone knows or can pics me.. would be HUUUUUUGEly appreciated.

  • 4 months later...

old thread but issue continues..

ill check for the second one tomorrow.. going to start from scratch

1)clean out engine water lines, thermostat+housing,waterpump+rad

2)redo thermostat + waterpump, wait for goop to sealup

3)bolt shit back together

4)fill rad with fresh coolant.

5)bleed system + test

anything else i may be missing?

  • 4 weeks later...

mate i got the exact same problem.

tried all the stuff you have....

i just keep a close eye on the temperature and if if gets too hot when im in traffic i just give it some revs to get the water flowing...

pretty lame but im to lazy to figure it out lol

  • 1 month later...

had a water leak at the back of the block, having it fixed and new lines made up.

battery check yours =)

remember stock gauge doesnt go up until its PASSED a safe temperature for awhile..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
×
×
  • Create New...