Jump to content
SAU Community

Recommended Posts

Hey guys.. couldnt find the tech help section.. so i figured this would be the best spot.. kinda..

I have an R34 GTT, recently i thought my water pump had died on me as i was getting no water flow through the top radiator hose, the top hose would be hot, the bottom hose would be cold.

So i took out the thermostat all together and tried again.. yet again no water flow.. so i got a hose stuck it in the bottom hose, water comes out the top no problem, vica versa still OK.

Swapped the water pump + thermostat on the weekend to an Rb30 item + Nismo thermostat, while at it i swapped my rad hoses to Silicon items aswell.. (mate told me my factory water pump still looked OK, it only had the slightest play in it, blades all ok)

Now by no means am I a mechanic, so i could be missing the most BASIC thing in the world. I've filled it up.. and yet again it seems like no flow. I idle the car for about 10 minutes and you can feel the pressure building in the hoses (as normal.. kinda..) and then the rad cap opens up to let the boiling water out of the overflow hose.. obviously at this point i turn the car off and let it cool down..

PLEEEEASE help me.. so confused and have no idea or reason i can think of as to why its overheating SO easily.

Also, if anyone knows, does ALL the water from the engine HAVE to pass through the turbo water lines, mine look abit small (Apexi turbo swap) and if it has to all go through the turbo i think that could POSSIBLY be the issue..

Edited by illusiVe

Sounds like the Radiator is blocked. Actually, it seems obvious. If you have changed everything bar the radiator and its still doing it...

PS Nismo thermostat is only causing you more harm than good.

radiator seems to hold pressure no problems.. its only when the car is getting damn hot im getting steam outta the overflow hose.. at which point i know its too hot..

if it is the radiator it'd have to be a DAMN tiny hole.. cause i dont see any steam ever coming out of it itself, nor water

i can get water through the radiator no problems with just pouring water in the top pipe, it comes straight out the bottom pipe of the radiator.. imho it also wouldnt explain why i dont get water coming out of my top radiator hose =(

ill still doublecheck + swap the radiator tonite.

Edited by illusiVe

It's not going to be the turbo water lines.

Now what temp are you getting on the cluster? Is it actually moving off half way and towards hot? You might still have a bad radiator. Just because you put water in the top and it comes out the bottom doesn't indicate it's good unfortunately, the core can be flowing poorly and water will still flow out OK. Have you been running coolant in it?

I would remove the radiator and take it to a radiator place to be check and cleaned. Failing that you may need to look at a possible head gasket problem, of which the symtoms can be found on here by searching.

Get the rad properly checked out first but, re-fit it then move on from there.

thanks james.

yeh the temp cluster moves up towards high.. but in my 3 years of owning it until this issue happen'd i had never seen it go past half way. I have always ran coolant in the system, however since the issue im just throwing water in until i can fix these stupid gremlins.

Can you just throw me a basic reason/s as to why it could be headgasket related?.. just cant make sense from it.

after talking to a mate, apparently RB's have a bleed valve somewhere near the intake mani? (plz confirm) which u need to open to get all the air out...

i have no idea where this is or what it looks like (i know what an intake manifold is though!) if anyone knows or can pics me.. would be HUUUUUUGEly appreciated.

  • 4 months later...

old thread but issue continues..

ill check for the second one tomorrow.. going to start from scratch

1)clean out engine water lines, thermostat+housing,waterpump+rad

2)redo thermostat + waterpump, wait for goop to sealup

3)bolt shit back together

4)fill rad with fresh coolant.

5)bleed system + test

anything else i may be missing?

  • 4 weeks later...

mate i got the exact same problem.

tried all the stuff you have....

i just keep a close eye on the temperature and if if gets too hot when im in traffic i just give it some revs to get the water flowing...

pretty lame but im to lazy to figure it out lol

  • 1 month later...

had a water leak at the back of the block, having it fixed and new lines made up.

battery check yours =)

remember stock gauge doesnt go up until its PASSED a safe temperature for awhile..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...