Jump to content
SAU Community

Recommended Posts

Hey guys.. couldnt find the tech help section.. so i figured this would be the best spot.. kinda..

I have an R34 GTT, recently i thought my water pump had died on me as i was getting no water flow through the top radiator hose, the top hose would be hot, the bottom hose would be cold.

So i took out the thermostat all together and tried again.. yet again no water flow.. so i got a hose stuck it in the bottom hose, water comes out the top no problem, vica versa still OK.

Swapped the water pump + thermostat on the weekend to an Rb30 item + Nismo thermostat, while at it i swapped my rad hoses to Silicon items aswell.. (mate told me my factory water pump still looked OK, it only had the slightest play in it, blades all ok)

Now by no means am I a mechanic, so i could be missing the most BASIC thing in the world. I've filled it up.. and yet again it seems like no flow. I idle the car for about 10 minutes and you can feel the pressure building in the hoses (as normal.. kinda..) and then the rad cap opens up to let the boiling water out of the overflow hose.. obviously at this point i turn the car off and let it cool down..

PLEEEEASE help me.. so confused and have no idea or reason i can think of as to why its overheating SO easily.

Also, if anyone knows, does ALL the water from the engine HAVE to pass through the turbo water lines, mine look abit small (Apexi turbo swap) and if it has to all go through the turbo i think that could POSSIBLY be the issue..

Edited by illusiVe

Sounds like the Radiator is blocked. Actually, it seems obvious. If you have changed everything bar the radiator and its still doing it...

PS Nismo thermostat is only causing you more harm than good.

radiator seems to hold pressure no problems.. its only when the car is getting damn hot im getting steam outta the overflow hose.. at which point i know its too hot..

if it is the radiator it'd have to be a DAMN tiny hole.. cause i dont see any steam ever coming out of it itself, nor water

i can get water through the radiator no problems with just pouring water in the top pipe, it comes straight out the bottom pipe of the radiator.. imho it also wouldnt explain why i dont get water coming out of my top radiator hose =(

ill still doublecheck + swap the radiator tonite.

Edited by illusiVe

It's not going to be the turbo water lines.

Now what temp are you getting on the cluster? Is it actually moving off half way and towards hot? You might still have a bad radiator. Just because you put water in the top and it comes out the bottom doesn't indicate it's good unfortunately, the core can be flowing poorly and water will still flow out OK. Have you been running coolant in it?

I would remove the radiator and take it to a radiator place to be check and cleaned. Failing that you may need to look at a possible head gasket problem, of which the symtoms can be found on here by searching.

Get the rad properly checked out first but, re-fit it then move on from there.

thanks james.

yeh the temp cluster moves up towards high.. but in my 3 years of owning it until this issue happen'd i had never seen it go past half way. I have always ran coolant in the system, however since the issue im just throwing water in until i can fix these stupid gremlins.

Can you just throw me a basic reason/s as to why it could be headgasket related?.. just cant make sense from it.

after talking to a mate, apparently RB's have a bleed valve somewhere near the intake mani? (plz confirm) which u need to open to get all the air out...

i have no idea where this is or what it looks like (i know what an intake manifold is though!) if anyone knows or can pics me.. would be HUUUUUUGEly appreciated.

  • 4 months later...

old thread but issue continues..

ill check for the second one tomorrow.. going to start from scratch

1)clean out engine water lines, thermostat+housing,waterpump+rad

2)redo thermostat + waterpump, wait for goop to sealup

3)bolt shit back together

4)fill rad with fresh coolant.

5)bleed system + test

anything else i may be missing?

  • 4 weeks later...

mate i got the exact same problem.

tried all the stuff you have....

i just keep a close eye on the temperature and if if gets too hot when im in traffic i just give it some revs to get the water flowing...

pretty lame but im to lazy to figure it out lol

  • 1 month later...

had a water leak at the back of the block, having it fixed and new lines made up.

battery check yours =)

remember stock gauge doesnt go up until its PASSED a safe temperature for awhile..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...