Jump to content
SAU Community

Recommended Posts

It's all listed on the website... except for the alarms it seems.

http://www.sauvic.com.au/sponsors_supporters

Either way, stop being a tightass and just join :)

you can get 10% off at most places anyway though... add the alarm :P if you had, you would have another member

How much margin do you think are in tyres?

option1garage do them at almost 65% of their RRP

http://kumhotyres.businesscatalyst.com/pcrku36.htm http://www.option1garage.com.au/NewTyres.htm

Edited by RB_Ryan

Look i'm not going to get into an argument about tyres.

Putting up one product and comparing RRP from a products website and then comparing that to a reseller who obviously isn't paying anywhere near that - is a rather bad example.

I know for a fact there is nothing like the margins in tyres that there was 4-5 years ago.

You asked, i showed you, now you argue... My hands are tied

it wouldnt let me edit the post too

How much margin do you think are in tyres?

option1garage do them at almost 65% of their RRP

http://kumhotyres.businesscatalyst.com/pcrku36.htm http://www.option1garage.com.au/NewTyres.htm

spoke to trackside and option1garage should NOT be doing those prices.... pricing up RE01R;s and RT615's :starwars:

where possible i try to stick to the little guys, but traineewage sucks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...