Jump to content
SAU Community

Full Flow Oil System, Drilled Pump, Plugged Block. Anyone Done This?

GTRNUR

By GTRNUR,
in Engines & Forced Induction

 Share

Recommended Posts

GTRNUR Grand Master

GTRNUR

Posted
Posted (edited)

Hi Guys,

Im very close to finalising the last of my machining for my new engine and have an oil system question. I have built quite a few high performance VW engines and one of the things we do with the oil systems is to use an oil pump that doesnt return oil to the crankcase. Instead it pumps the oil to an external fitting where its routed via a remote filter and cooler. They call this a full flow oil system.

So, ive heard of RB26's that use a deep sump extension with an external oil pickup. The approach would be to dril and plug the engine block's oil pickup gallery and then drill and install a fitting in the pump to allow a connection for the line that comes from the sump. I think this was done on the bathurst GTR's.

Has anyone tried doing anything like this with the output side of the pumps and then returning oil directly to the block? The advantage would be that you dont have to use one of those remote adapter attachments, and the oil hoses would be a bit shorter.

Cheers,

Ian

Edited by GTRNUR
Risking Grand Master

Risking

Posted
Posted (edited)

Nothing even close to a dry sump set-up.

Done plenty of the pick up sides but never done it with the pressure side.

I cant see any reason why it wont work the only advantage is like you say slightly shorter oil lines for the cooler and no need for a filter mount on the block.

Its alot of friggin around when the original gallery works fine and filter mounts are not that hard to use.

On a race car I could see some small benifit in making things simpler but for general use I cant see the point.

Edited by Risking
GTRNUR Grand Master

GTRNUR

Posted
  • Author
Posted

Well it seems I may not need to do this anyway now.

The oil filter block I have sourced had a large metal cylinder with to hose connections on it. If im not mistaken this is the oil cooler attachment with the built in oil thermostat thats used on the N1 GTR's right?

While drilling and plugging galleries might seem like a pain in the ass, ive actualy had that done to all the galeries anyway so I can clean out the block properly. The block has had a lot of metal shaved out of it and I dont want any of that in the oil system.

Risking Grand Master

Risking

Posted
Posted

Yes thats the OEM oil cooler.

Your better off pissing it all off and screwing an oil filter thread straight into the block and doint it RB30 style with the oil filter mounting plate straight to the block.

We dont run those OEM coolers with aftermarket cores as well.

Found they allow way to much oil temp variations depending on heat soak in the cooling system etc.

GTRNUR Grand Master

GTRNUR

Posted
  • Author
Posted

There is a steel sleeve in the block that normally has an o-ring seal onto the inside of the filter mount.

How do you screw the filter straight onto the block, or do you mean use the filter mount and just dont connect the coolant lines to the oil cooler side of the mount?

zebra Grand Master

zebra

Posted
Posted

I thought of doing that while my motor was out, sounds like a good idea.

You could always get a plate made up with dash fittings for the oil cooler that bolts up to where the standard one does, like a lot of SR20 guys do

r33_racer Grand Master

r33_racer

Posted
Posted

You need a double threaded fitting to replace the one with the push over o ring setup which allows the use of the oil cooler block.

Rb30 has this double threaded fitting...

GTRNUR Grand Master

GTRNUR

Posted
  • Author
Posted
You need a double threaded fitting to replace the one with the push over o ring setup which allows the use of the oil cooler block.

Rb30 has this double threaded fitting...

Ah... so that fitting in the block is threadded in and not pressed in then. That makes more sense.

shanef Grand Master

shanef

Posted
Posted

I wouldnt even bother trying to source the adapters new, i tried that and instead raided the rb30 collection (different thread size each end). To get them off the block just go buy 2 half sized nuts and do the old double nut lock trick.

Pic show what i did: Got the sandwich plate from mscn http://www.mscn.com.au/scripts/prodView.asp?idproduct=354 part number TD1014B

post-20917-1248869146_thumb.jpg

Beer Baron Grand Master

Beer Baron

Posted
Posted

yeah getting rid of the standard oil/coolant heat exchanger is a good idea. people do it all the time with SR20. tomei make one as do saurus for SR20. (pics below) you could get something made for RB26 easily enough, there would be a market for it for sure.

nengun-1482-00-tomei-n2_oil_block.jpg

02_parts_oilcooler_sr_kiri.jpg

P9150012.jpg

obviously the GTR one would look very different but you get the idea. :pirate:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
×
×
  • Create New...