Jump to content
SAU Community

Recommended Posts

FS.

1993 r32 gtst Mspec. (maroon)

124,000kms on chassis

S2 RB25DET (124,000) stock engine.

RB25DET gearbox

excedy heavy duty brass button clutch (1000kms old)

new gearbox oil

new motor oil (motul 8100)

new coolant

ISC n1 coilovers (5000kms)

nothlene bushes throughout the whole car (have receipts)

JJR cooling pro tube and fin FMIC (300kms)

splitfire coilpacks (300kms)

turbosmart Eboost controller

SUNROOF

clear indicators

carbon fibre eye lids

3inch exhaust with gutted hiflow cat

TE37 in white, 18x8.5 +35 (85% tread), 18x9.5 +35 (90% tread)

custom SOLID gearbox xmember (made by ryan)

tailshaft done by hardie spicer

the body is fair straight, few imperfections here and there but nothing major. inside the car is CLEAN with no broken dash vents.

the car is NOT rego'd as a rb25det. only needs brakes and should be sweet.

you really need to come have a look to see for yourself as pictures are way different.

looking for 15k or will reduce price for removal of parts. or possible swap for TRACK only car plus cash my way.

0433290801

cheers,

adrian

Link to comment
https://www.sau.com.au/forums/topic/281067-r32-gtst-mspec/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...