Jump to content
SAU Community

Recommended Posts

Looking for cheapy black adjustable GT spoiler to go on the S13 before the DECA day on the 15th of August.

Not looking for anything super special just want some extra downforce over the rears in conjunction with some semi's I'm getting.

Needs to be complete and I'm happy to pay postage (I'm in albury wodonga) or can pickup if you're nearby plus will be in Melbourne on the weekend of the 8th so can collect depending where you are down that way. (completing transaction at DECA is also a possibility, I'll just bring tools to fit it :merli: )

Failing this I'll just go one of the cheapy eBay jobs but even they are a bit exxy so that should give you an idea of price.

I've got a few computer bits lying around for possible trade and I've got an as new S13 CA brake master cylinder and S15 brake booster in great condition also if that is of any interest.

reply, pm or gimme a buzz on 0427 928 304

Cheers :down:

Link to comment
https://www.sau.com.au/forums/topic/281095-wanted-gt-spoiler-asap/
Share on other sites

To be honest...

A spoiler at DECA is useless. You are not going fast enough round corners for any good quality spoiler to make any effect on traction, let alone a cheap spoiler.

The only time i used my spoiler at DECA was for "shits and giggles"; not to improve traction.

For a good quality spoiler to work, you need air speed, and you only get air speed when taking corners at speeds over 100km/h.

Just letting you know so that you don't waste your time and money for nothing. My spoiler only goes on for Show 'N Shines :merli:.

You're asking a couple months too late.

The old one i had, i gave away to a guy from my mechanic's w/shop because i got sick of tripping over it, in the shed. My current c/f looks too good at shows, and i need an excuse to justify the mounts on my boot ;)

You're asking a couple months too late.

The old one i had, i gave away to a guy from my mechanic's w/shop because i got sick of tripping over it, in the shed. My current c/f looks too good at shows, and i need an excuse to justify the mounts on my boot :banana:

Damn you ;)

Yes, it is mildly adjustable.

Black, lightweight aluminum and never been used (bought it for my car but it's too small for my liking).

Are you able to show me two pics, one showing each end of the adjustment scale, as in one pic showing max up and one showing max down so i can get an idea of how much adjustment we're talking. Also, how much are you after, are you in melb, do you want to post or are you happy for me to collect the weekend after this one coming or at deca etc etc.

Cheers

EDIT: What are the dimensions? Height and width

Edited by ActionDan

I can get pics and measurements to you on Monday. The wing is sitting in my workmate's office and he is away on a work trip this week.

I'd say it's about 10 - 14 inches high and maybe 1.5m wide. I could be wrong though.

I paid $180 new I think. It's still brand new so maybe $140? Or is that too much? I'm not too fussed.

Pick up is preferred but I can post it if need be.

Hey

I have a C-WEST full carbon fibre GT wing!!! I bought it for my car but I've sold the car so.....

I'm prepared to sell it for $300 ... lemme know if you are still looking for one....

in melbourne for pickup only...

Cheers

vIk

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...