Jump to content
SAU Community

Recommended Posts

How do you remove them? There must be a special tool?

I'd rather get them from Vic Police rather than interstate on eBay as I can be certain the removal tool will be available.

Go to bunnings , they sell them in the builders department. I know because i work there lolz

Link to comment
https://www.sau.com.au/forums/topic/281179-how-to-stop-licence-plate-theft/
Share on other sites

Vic Police had a stand at the Melbourne F1 this year for the one way screws. You just had to tell them what car you had and they looked it up in their book and gave you the best screws to use.

I haven't even looked at them yet because I was going to wait to order personalised plates before using them.

Maybe you can still pick them up from police? :\

pretty sure most cop shops will hook you up

Hi guys, my mate just bought some personalised plates, but as he doesn't have a garage, has to park his car outside. I am also looking into getting custom plates.

I had a bad experience 2 years ago with people stealing my plates outside and then, I guess, using it for petrol station theft (this was in the bad old days of $1.60/L prices). It wasn't customised, so I ordered new standard plates,.

If it was personalise plates, could you re-order the same ones or would it have to be a different combo? I would be gutted if I lost my combo. I was looking around at ways to deter licence plate theft and I stumbled on this:

http://www.drive.com.au/Editorial/ArticleD...ArticleID=57071

I totally didn't know about this when it was on. Does anyone know if this service is still available anywhere?

Had a look at eBay without much success. Only listing I could find was this:

http://cgi.ebay.com.au/8-x-ONE-WAY-NUMBER-...bayphotohosting

I don't understand how they can be one-way screws when they are screwed in with any normal screwdriver, look like normal screws, and apparently don't need a specialised tool to unscrew.

Any advice greatly appreciated.

Vic Police had a stand at the Melbourne F1 this year for the one way screws. You just had to tell them what car you had and they looked it up in their book and gave you the best screws to use.

I haven't even looked at them yet because I was going to wait to order personalised plates before using them.

Maybe you can still pick them up from police? :\

If you look at the screws closely the edges that get hit by the screwdriver when undoing are ramped, causing the drive to pop out of the slot.

100px-Screws_-_tamper_resistant_slotted.jpg

How do you remove them? There must be a special tool?

I'd rather get them from Vic Police rather than interstate on eBay as I can be certain the removal tool will be available.

Alen keys bolts.

and put a bolt on the otherside, and if you like, lock tight also, and number plate proctectors position right your can get any fingers under there :)

Or one better would be Torx bolts.

2094.jpg

Alen keys bolts.

and put a bolt on the otherside, and if you like, lock tight also, and number plate proctectors position right your can get any fingers under there :pirate:

Instead of loctite use a lock nut, that way the only way to get it off is a spanner on each side.

Dont know where to get them from but there is a bolt that once it is torqued up to a certain pressure the head snaps off, you either ues a chisel/angle grinder or have to cut a grove in the top to use a screw driver.

Dont know where to get them from but there is a bolt that once it is torqued up to a certain pressure the head snaps off, you either ues a chisel/angle grinder or have to cut a grove in the top to use a screw driver.

The drive snaps of the nut normally and they just have a flat head, the ones we use at work are called Hi-Locks, Put a big penny washer under the head of the fastner and nut as well, makes it harder to rip off the number plate....

use a nail gun and nail it along the border of your number plate.

that's what we have to do in Asia. as soon as we bought our new 1989 toyota corolla se (back in 1989) we took it to a workshop to have one of the guys there to nail gun all badges, YES, those are the toyota logo, the 1.6SE badge at the boot, etc. Put a screw on the grill toyota badge as well.

so they don't go missing.

Maybe I'm missing the obvious, but if you can't get them off, how the f**k do you get your plates off when you want/need to?

When do you want to?

But if your happy to make it easy for someone else to get your plates off because MAYBE one day you MIGHT need to take them off then you'll just have to deal with it when there stolen.

When do you want to?

But if your happy to make it easy for someone else to get your plates off because MAYBE one day you MIGHT need to take them off then you'll just have to deal with it when there stolen.

Considering this is a website of car enthusiasts...Car shows, DECA, track days and so on.

screw a metal strip into your bumber or where ever its meant to go make sure you drill holes in it prior to putting it on that match your number plate screw holes then potrivit your number plate to the metal strip if you need to get them off you just use a drill the number plate will cover the screws that are holding the metal stip to your bar :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...