Jump to content
SAU Community

Recommended Posts

yes the front bar should fit no worrys, its really only the side skirts and maybe the rear bar that you could have issues with (the side skirts definelty wont fit unless made for a 4 door)

the one in the pic is on a GTR, and i dont think Do Luck make a version for the GTT, but i may be wrong on this

so basically, no, the front bumper wont fit your 4 door. unless you fit a GTR bonnet and front guards

you may however find someone making a copy of the kit that does fit a GTT

where do you buy them in NSW? Do you have to order internationally from www.do-luck.co.uk? If you buy the GTR Kit from this website, as they don't have a GT-T kit, If you sourced GTR front guards and a GTR 34 Bonnet. Would they go together perfectly?

What about the rear bar / skirts without having the flared rear on a GT-T.

with the gtr front guards, bonnet, and hinges (and propably other parts, do a search for what is needed) the front bumper should fit

but be prepared to spend $$$

the side skirts and rear bumper will not fit.

you will need gtr rear guards and maybe other bits and pieces.

there are a few topics floating around here by guys who have gone through the process of fitting GTR bodykits to GTTs, they are worth a look before you go any further

IMO you are better off looking for a GTT copy of the kit

Edited by Kranker

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...