Jump to content
SAU Community

Recommended Posts

well I just bought a VIP bodykit for my car, its on its way from japan, no one in australia makes it and I'll be pulling moulds off it soon.

I'll attach a pic when i find it... lemme know if you want one

Link to comment
https://www.sau.com.au/forums/topic/28163-32-front-bar/#findComment-585952
Share on other sites

dunno yet, I'm doin it thru my mates at J-Spec, they're gonna be organising the moulds etc, really depends on how many people want them. I dunno what the cost will be either, coz we physically haven't seen the kit in its entirity yet, but we're bringing down the entire kit for an R32 GTS/GTSt 2 door and 4 door. All depends on what the mould fabricators tell us in the end.

The original kit cost a little under 2 grand with shipping. (God bless RACV insurance and that guy who hit my car). I'm buyin the 2 door version for my "project how wide can you make a GTS?" and the guys at J-Spec are buyin a 4 door version for their "project family skyline drifter" :P

And yes, the arse end is sweet as, altho its wierd in the catalogues we got, one of em has a higher arse end to the other, this one I'm getting looks lower and more VIP. I din post a pic of it since you weren't after the rear bumper, just the front.

The Godfather kit is a knockoff of the Vertex kit, so somewhere along the lines I think they got the parts styling mixed up.

But anyways, sorry for the hijack...

mackie... wuts your timeframe?

Link to comment
https://www.sau.com.au/forums/topic/28163-32-front-bar/#findComment-586112
Share on other sites

well it specifically said on the package that it does not fit BNR32 front guards (which is why I'm gonna have to scrap gettin em and jus get mine flared out like sumfin stupid)... dunno if they were referrin tot he side bars or the front bumper tho...

Link to comment
https://www.sau.com.au/forums/topic/28163-32-front-bar/#findComment-586338
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...