Jump to content
SAU Community

Recommended Posts

Ha! Got it back and it was pumping out just shy of 360kw atw. It lifted off the dyno the first run so we needed people in the boot.

The Autronic rocks.

Hahaha that's awesome, mine too. I think the chick that works there now nearly fell out :(

Will have to line them up one day very similar output now!

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I hope to get along as a spectator :)

Off topic but I beleive it ran 440awkw's on pump fuel? That number sticks in my head for some reason, correct me if I'm wrong. There is some very nice machining and porting work on the engine. Not many RH9 certified in Oz, top effort!!

Personally 360awkw's (480hp) is ORSM on the RB26 with small twins and minor mods for the 32 GTR's. -7's for response, lovely. HKS 2530's, -5's, N1's & -7's great for the daily GTR on the street. If I had the extra $$$ for the HKS2530's I probably would have, but -7's rock and are great reliable bang for buck.

Edited by Sinista32
Too true, I've heard some horror stories about Gas motorsport as well, but I'll leave that for another day.....

PM sent to everyone that was asking questions. Basically, I have told them that it is up to them wether they run their cars and all I have done is to share my experience.

hey if you dont mind sending me your exprience that would be appreciated. was looking forward to the day and possibly running my car up as well be great if you could tell me what happend.

Thanks mate

Haha and I don't know what you have running in your GTR but my "small" twins aren't going to beat a Supra with a big single!

Nor do I really care, for me this is about checking out some awesome cars and seeing how mine goes at all 4 as opposed to just at the rears like I normally see.

Unless you want massive horsepower for a dyno, don't go the single. Twins still give you far better response.

Who are you thinking about doing the job?

Single not much laggy i was thinking of a gt35r or T04z.

Mates Supra running a T04z spools at 3krpm

hey if you dont mind sending me your exprience that would be appreciated. was looking forward to the day and possibly running my car up as well be great if you could tell me what happend.

Thanks mate

PM Sent

I know there is only 2 supra's going on this day should be easy to beat.

The 2 Supra's that are going on the dyno are one MKIII N/A and a TO4Z powered MKIV. The N/A will be lucky to get 90 rwkw and the single should get around the 360 to 370 rwkw. I don't know of any others that will going on this dyno.

Single not much laggy i was thinking of a gt35r or T04z.

Mates Supra running a T04z spools at 3krpm

unless it is running a tiny exhaust housing (which then defeats the purpose of going a large turbo) a T04Z is not going to be giving you decent boost at 3k, on a 26 you are looking at full boost around 4500-5000.

PM Sent

The 2 Supra's that are going on the dyno are one MKIII N/A and a TO4Z powered MKIV. The N/A will be lucky to get 90 rwkw and the single should get around the 360 to 370 rwkw. I don't know of any others that will going on this dyno.

Arr so that white Supra is going on.

I take it Rp071 you going to the Show and Shine

MkIII N/A might get 70rwkw lol

unless it is running a tiny exhaust housing (which then defeats the purpose of going a large turbo) a T04Z is not going to be giving you decent boost at 3k, on a 26 you are looking at full boost around 4500-5000.

This is true engine displacement makes a difference.

Might also do a stroker

For everyone who is planning on coming - I wont be able to organise a meeting place as I will be there early to help set up so someone will need to put their hand up to be the organiser :D

I'm seriously looking forward to this event, I think that if we get enough interest it could lead to birth of a sort of Japanese car Summernats (without the bogan idiots of course) in the future!

See you all there!

Is this really all that are coming???

1. Bullet32 - Show 'n' Shine

2. Kat - Dyno comp and Show 'n' Shine

3. Bluprint - Show 'n' Shine

4. Ex!$t3nZ - Show 'n' Shine (ill be coming but my car will probably be parked with the toymods people)

5. Shell - Show 'n' Shine

Where would we like to meet beforehand? Haha if there's 5 of us and only 4 skylines not sure if this actually matters.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...