Jump to content
SAU Community

A'pexi Bolt On Turbo And Suction Kit + Injectors

Bliksem
 Share

Recommended Posts

Bliksem Veteran

Bliksem

Posted
Posted

A'PEXi Turbo Model AX53B70 P25 (Basically an equivelant to a HKS GTRS) Have had the exhaust housing ceramic coated in black to keep temps down.

20,000kms old Purchased through Greenline 2 years ago. Still as good as new no shaft play ready to bolt on. Selling as I have changed to a GT35R, will also throw in a custom stainless dump pipe.

$1650

CIMG1984.jpg

CIMG1988.jpg

A'PEXi Super Suction Kit

Aluminium Hard pipe to replace the rubber intake hose between the AFM and the turbo, Hard to find.

$180

CIMG1985.jpg

Also Have a set of 6 S15 injectors 470cc purchased from Deatschwerks also 20,000kms old Asking $380

All items located in Griffith NSW. Willing to post.

Bliksem Veteran

Bliksem

Posted
  • Author
Posted

I made 250kw at 14psi, turbo is rated at 380ps, so capable of more. Trent as Status tuning told me he has seen these make close to 300kw on an SR20.

I have since discovered I have a large exhaust restriction which would have been limiting the potential of this turbo on my setup.

sparco33 Contributor

sparco33

Posted
Posted
I made 250kw at 14psi, turbo is rated at 380ps, so capable of more. Trent as Status tuning told me he has seen these make close to 300kw on an SR20.

I have since discovered I have a large exhaust restriction which would have been limiting the potential of this turbo on my setup.

pm sent for injectors. will buy.

john-e boi Mentor

john-e boi

Posted
Posted (edited)

definantly consider the Super Suction kit sold if falls through. also interested in the turbo, straight bolt on? is there everything needed to bolt onto a rb25det? will take both off you if possible. thanks

Edited by john-e boi
colesy_skyline r32 Enthusiast

colesy_skyline r32

Posted
Posted

hey mate.. i am interested in the injectors..

i want them for my r32 gtst..

will the fit straight into standard rail??

and will i need resister pack??

please pm me and let me know - am very keen

ben

JKR-32 Proficient

JKR-32

Posted
Posted

if ur 32gtst is still an rb20, then no, they wont fit ur standard rail. s15 injectors are side feed like rb25's. rb20 and rb 26 are top feed.

ps. i'm keen on the injectors.. would u do cod? as i'm in brisbane.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...