Jump to content
SAU Community

Recommended Posts

While we have a thread open and I can't be f**ked searching, which is the best (not necessarily the most expensive) lock kit to get?

I got mine from "New Parts" Section on Nissansilvia ages ago. from QLD seller. was $99, had all the parts easy to install. nice strong bar. wasnt a cheap hollow feeling.

som1 would know this.. my when i pulled out my Hicas system out i realised on the inside part where the tie rods connect to the hicas bar that my stock unit was Welded together.. would this be a method of stopping hicas? all related pipes and such were already removed.

Just learn to drive properly and Hicas is your friend. Then you don't need a lock bar.

He might be doing some track work and wanting some consistency there, Hicas isn't always your friend...

That's why I want to lock the HICAS. I've heard it's fairly unpredictable at certain speeds and I'd like to be able to control my oversteer without another variable in the already large equation.

That's why I want to lock the HICAS. I've heard it's fairly unpredictable at certain speeds and I'd like to be able to control my oversteer without another variable in the already large equation.

I hear people say that all the time. I bet 95% of the people who say it have read it, but never experienced it. When Hicas does its thing, 99% of the time you don't feel it. If you're pushing hard and you do feel it, just go with the flow, it's certainly not un-predictable if you understand what it is going to do..

Why remove all that tech and development in hopes that a solid bar will do a better job, especially if has never been a problem for you. Don't remove it just because you read something on a forum somewhere, some clever little Japanese men put a lot of thought and money into designing a system that does some really clever things to improve handling and driveability. If a solid bar was better, Nissan would have installed it in the factory...

Unless you're trying to reduce the weight in the car, and you never plan to drive around corners (eg drag car), or you plan to do loads of drifting, save yourself the $$ and learn to enjoy the hicas.

Problem is, this is a computer controlled thing...and it's not constant...being dependant on speed and your angle of steering. Judging by the pic above it's just an unnecessary variable thrown into the equation. I don't want to get used to controlling it, as for the most part of track driving I can only see it being detrimental. I can appreciate the technology that went into it, but just like traction control and ESC, no thanks.

See I actually liked Honda's four wheel steer (atleast the one in the 2nd Gen preludes). It only operated at low speed so it made the things a dream to park (had to be careful of front wheel drive oversteer when booting through round-a-bouts) and didn't affect handling at higher speed.

That's what I thought HICAS was going to be like before I bought the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...