Jump to content
SAU Community

Recommended Posts

Wanted for a project

In particular I am looking for a R33 GTS-T with front/rear end damage, blown engine or an otherwise a rolling shell. Auto or manual. I would equally be interested in an R32/34, S13/14/15, 180sx, RX-7, Soarer, or Supra. 

Essentially as long as the chassis rails are straight I will be interested.

Located in tasmania - will pay for interstate transit.

  • 3 weeks later...
Wanted for a project

In particular I am looking for a R33 GTS-T with front/rear end damage, blown engine or an otherwise a rolling shell. Auto or manual. I would equally be interested in an R32/34, S13/14/15, 180sx, RX-7, Soarer, or Supra.

Essentially as long as the chassis rails are straight I will be interested.

Located in tasmania - will pay for interstate transit.

Hey mate, i have posted my 32gtr shell on sau, i put it in the tassie section, check it out if you want

I also have a R33GTST rolling shell with diff bootlid and spoiler one door one guard rear seat all suspension no brakes no damage

Missing motor and gearbox but has pedals and some small interior parts 600 also

Its complied missing green plate but still has chassis number plate and build plate so still can ber registered

Rgds

Daniel.

post-3004-1251522143_thumb.jpg

Edited by sav

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...