Jump to content
SAU Community

Recommended Posts

OK so I have a sandwitch plate installed for some after market guauges. I did it myself and am having evil oil leaks from the nuts that block the additional mounting locations for sensors (4 all up). I am totally over it as I am loosing a litre of oil every few weeks at the moment. Can anyone suggest a better way to mount the sensors? I am considering a remote filter mount but most of them dont work with guauges. The guauge sensors are not the same thread as on my car either so I can just screw in the replacements unfortunately. Alternatively can anyone suggest where I can get a decent sandwitch plate that doesnt leak?

Also what do you guys think is the best washer for the sump plug, Tin or that fibre stuff (the red ones).

Bryce :P

copper or aluminum are pretty good sump plug washers. i think most if not all toyota's use the fiber ones and they work really well. you could drill out the plates adapter holes and re-tap to right thread size/pitch or put in a helicoil.

you did put thread tape around the senders and plugs right? Also there are a couple of similar sized threads like m10 and 1/4npt so make sure you have the right fittings.

definately right center adaptor. It screws in tight and on removal it looks like the seal has been compressed which looks good. I think the main issue is around the extra sensor screws on the side of the plate itself. Where can I get a really good plate with quality seals and bolts?

Yeah if its one of the blue ones JJR sell you need to use thread tape on the sensors and the blank bolts.

The blank bolts are tapered from memory. So make sure they are in the correct place and crank them in. Unsure if they come out again. The last (and only) one i bought stripped the plate when i removed the blanks.

Try using some brass plugs in there, make sure you get the right thread pitch/size. When you put them in use a sealer, I'm pretty sure loctite will make something suitable, or good old stag should work. Do them up tight and leave it off the car until the sealer cures.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...