Jump to content
SAU Community

Recommended Posts

it only kicks in around 80kph as Aaron has said. its basically an electronic actuator (motor) that controls a steering rack attached to the back of the rear subframe and is liked to the rear of the wheel hub with a toe arm. on the R32 & S13 models it was a hydraulic setup driven off the power steering pump. it turns the rear wheels only by approx 0.7 deg from center, so if your where going around a right hand bend you wheels would be something like this:

front wheels // //

rear wheels \\ \\

when you install a HICAS lock bar you remove the actuator/rack and put a solid bar in between the two toe arms to hold the rear wheel toe where you want it.

edit: beat me with a much better diagram MIKE lol

Edited by QWK32
Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4753292
Share on other sites

HICAS is a very complex system, that is way over what most people think it is.

It helps to make a car feel shorter & more nimble, and helps to damp Yaw effect.

A long wheelbase car is easier to control but slower to turn. Rear wheel steering helps to turn the vehicle.

It has been heavily critisized for making the rear end feel loose, vauge and unnatural.

Lots of HICAS systems get taken off cars, mostly because owners do not fully understand what it is about.

It is there to make the car drive faster.

As you enter the corner the rear of the car actually gets kicked out, which reduces understeer, if you stay hard on the accelerator, as the car reaches the apex, the steering, G-sensors and throttle position will let the car "know" that it is at the apex, the rear wheels will come into phase and the car will steer straight though the apex, to take the fastest line through the corner.

It's kinda like taking a drifters line without drifting.

Your car should have the same system as the R34, which is also a model following control system.

It is pre-programmed to follow cornering models. It is not just feedback based.

If you really want to find out more about, and get a new admiration for our favorite car (sorry not the Stagea) get the book Nissan GTR by Alex Gorodji. Some of the above is taken from the book.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4753764
Share on other sites

simple diagram

how_hicas_works.gif

i really hope it doesnt work that way, thats very dangerous!! if the rear wheels are turning in the same direction as the front wheels, instead of the opposite, then u r in big trouble if the front doesnt turn in. in an understeer situation, that would have the rear wheels turning u straight off the road!!

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4753813
Share on other sites

HICAS is a very complex system, that is way over what most people think it is.

It helps to make a car feel shorter & more nimble, and helps to damp Yaw effect.

A long wheelbase car is easier to control but slower to turn. Rear wheel steering helps to turn the vehicle.

It has been heavily critisized for making the rear end feel loose, vauge and unnatural.

Lots of HICAS systems get taken off cars, mostly because owners do not fully understand what it is about.

It is there to make the car drive faster.

As you enter the corner the rear of the car actually gets kicked out, which reduces understeer, if you stay hard on the accelerator, as the car reaches the apex, the steering, G-sensors and throttle position will let the car "know" that it is at the apex, the rear wheels will come into phase and the car will steer straight though the apex, to take the fastest line through the corner.

It's kinda like taking a drifters line without drifting.

Your car should have the same system as the R34, which is also a model following control system.

It is pre-programmed to follow cornering models. It is not just feedback based.

If you really want to find out more about, and get a new admiration for our favorite car (sorry not the Stagea) get the book Nissan GTR by Alex Gorodji. Some of the above is taken from the book.

i would have to agree, i had a loaner R33 sedan with hicas, and for a big heavy car, this thing handled quite well and could be easily thrown around. i have no idea why people complain about hicas so much. i think they hear that one person doesnt like it and calls it useless, then it MUST be. if it WAS useless, car manufacturers wouldnt be equipping cars with it.......

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4754142
Share on other sites

I think the biggest complaints about HICAS come from anyone who has a dedicated track/drift car, or frequents a track for racing or drifting. And because every second person thinks of themselves as a race car driver or drifter they remove it based on what the real race driver and drifters have said.

Personally I liked the HICAS on my old 32 but can vouch for the fact that once the tail end is out there, it's too easy to over correct because the HICAS system is also assisting the turn.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4754451
Share on other sites

You have to love the original HICAS implementation in the R31's - it had a couple of rams and flexed the entire K-frame on it's bushes!

4WS seems to have dropped off the radar these days, possibly due to it's mechanical complexity vs. what you can to with ESP and it's broader safety benefits.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4754683
Share on other sites

i really hope it doesnt work that way, thats very dangerous!! if the rear wheels are turning in the same direction as the front wheels, instead of the opposite, then u r in big trouble if the front doesnt turn in. in an understeer situation, that would have the rear wheels turning u straight off the road!!

open your eyes before your mouth please

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4755401
Share on other sites

i really enjoy hicas . and really notice when it comes on . eg same piece of road at different speeds . also mint for turning on hicas test and your car sits there and every 2 seconds the rear wheels move full lock (1 degree ish) one way and then other way then back to normal as fast as they can . and every one says wtf is your car doing ? "its break dancing "

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4755416
Share on other sites

Has anyone ever had HICAS work in a straight line? That sort of issue, giving the car a 'flick'? Possibly due to the wheel not being on straight...?

only when the speedo cable snapped when i was on my way home from work, hicas started playing up along with the usual heavy steering. i was crab walking up a straight road, very strange feeling.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4755455
Share on other sites

only when the speedo cable snapped when i was on my way home from work, hicas started playing up along with the usual heavy steering. i was crab walking up a straight road, very strange feeling.

That's exactly what I had but without the heavy steering. :) Definite crab walk. Happens at higher speeds like 80km/h and you need to steer into it and if slow down quick a flick out of it. I recently had work done on the suspension but the steering wheel is not that straight after the alignment and wondered if that had anything to do with it...? Speedo cable is all good.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/#findComment-4755483
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...