Jump to content
SAU Community

Recommended Posts

Couldnt decide between the 2. Catco seems to have a good reputation after my search but the X-Force one is stainless steel which I suppose is stronger? Catco's got the stainless stain version but its almost 400bucks for it (I'm not really keen on paying 400 for a cat). I know a cat is a cat but after hearing/reading post on people's melting kinda made me wanna seek some advise. Any suggestion? Oh they're both flanged which makes thing a lot easier for mounting. Thanks!

Catco

http://justjap.com/store/product.php?produ...=275&page=1

X-Force

http://justjap.com/store/product.php?produ...=275&page=1

Link to comment
https://www.sau.com.au/forums/topic/282541-catco-or-x-force/
Share on other sites

Depends on...

i) how long will you keep your car (& then a non-S/S may not matter)

ii) cfm rating of each cat (the higher the cfm the less restriction there is inside)

iii) how narrow the neck is before it meets the flange (the bigger the diameter the better)

iv) how rich your tune is (for the longevity of the cat)(some say that Jap is better than Chinese)

Officially the X-Force flows slightly more by way of CFM, but the Just Jap GTR make 330awkW with the Catco. I bought that exact Catco and the car is being tuned in a couple of weeks so I am no help from a customer's point of view right now!

Officially the X-Force flows slightly more by way of CFM, but the Just Jap GTR make 330awkW with the Catco. I bought that exact Catco and the car is being tuned in a couple of weeks so I am no help from a customer's point of view right now!

Is that the cheaper Catco or the more expensive one? I'm actually thinking of getting the $180 bucks one since so many people recommended them.

Is that the cheaper Catco or the more expensive one? I'm actually thinking of getting the $180 bucks one since so many people recommended them.

The cheaper one. :P That's the one I have, for the same reason you are considering one. Also, for the same reason you didn't spend so much on a cat is why I ended up with this - I simply couldn't justify $400+!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...