*work Meisters - If You Want Dish, These Are For U ! Epic*

[dahandfull]

Ok so i had planned a certain type of look that i wanted for my gtr, but over the last few months i have swayed for a different look due to the style of rebuild thats happening.

I bought these from jpn a few years ago and have sat in my shed eva since. You will need widebody kit for these as they hang out a fair way from factory r32 gtr guards. The tyres can be taken off and not be sent if thats what you want, or they will stay on for the sale. They arn't much good, prolly suit a few laps in a drifter as the are near/on the indicators. They are 265/35ZR18 dunlop lemanz

If i was to keep these, i would do a sticker replacement which you can easily buy from ebay or probably some business traders could get them and if i was feeling in the right mood, have a wheel shop pull them apart, re-polish the lip and paint re-paint the black spokes.

Specs are:

Work Meister S1 18x10 +18(F) 18x11 -8® 5x114.3

$2000

I am very open to swaps, interested in 18x9.5 to 18x10.5 advan, ssr, work, rays/volk anything jap realy.

Shipping will be on a courier, as this is much easier than aust post. Located on nth side of Brisbane, pick up is cool too.

Thanks

[dahandfull]

Pics of the rears

[alex.a]

hhmm nice. i have a set of bronze te37s.. but they are only 17"x9.5" +12 interested in trades?

[bean]

hey dude, trade for race seat.

CORBEAU carbon/kevlar race seat, they are hand made and weigh 7kg.

i bought 2 of them for a different project but only used 1.

has been trimmed in black itilian leather with red stitching and has perforated center, it is brand new

cost me over $2500 to buy the seat and have it trimmed

[dahandfull]

nope, sorry bean.. i got enought seats thanks

[dahandfull]

I think maybe i should add in that im not after a staggered set as a swap

[scottmiller92]

swap for my rims.

check my topics.

[alex_k]

nice rims mate! free bump for you.

[sebastion]

these are cheap as guys, if I had the money they would be gone... and mike only sells top quality and what he says is the genuine truth... top bloke

cheers mate

[dahandfull]

sorry scottmiller92 not after staggered sizes ir mesh one like that..

won't suit the look im after on my R

[bloodsword27]

how bad these sticl out of your guards? ive got a set of Weds Sports SA70's 18x10.5 +18 if youre intersted.

[mrgtt]

hey did you get my pm? if not pm me a price for shipping cost cheers

[dahandfull]

pm's sent

[Weezy]

Only if these wern't staggered.. I have a set of DTM Rush wheels in Satin black 18" x 9.5" wide and +27 offset, since nice and flush with the guards.

[gtrkiet]

these wont fit a r32 ay?

[PWND]

these wont fit a r32 ay?

yes, these will fit a r32 perfectly. you may just have to roll your rear guards a little....

[dahandfull]

yes, these will fit a r32 perfectly. you may just have to roll your rear guards a little....

well they sit at least an inch outside of my gtr front and rear. so modification is a must, either widebody rear or some extreme flaring of the rear fenders

[M I K E]

yes, these will fit a r32 perfectly. you may just have to roll your rear guards a little....

are you on drugs? 11-8 fits perfect on the rear of a 32? welcome to mexico

stupidly tough wheels, do you know if the fronts have much caliper clearance?

[dahandfull]

M I K E I havn't had them on the front of my car, cause I just havn't had the chance to, but from experience id say you would prolly need a 10-15mm spacer...

lol - viva la mexico

[dahandfull]

Hi All....

I just wanna point out that these will definately NOT fit standard R32-GTR guards. Im not 100% sure of R33/R34-GTR i would assume that they do not fit these either without some slight flaring (my opinion), and gtst would be a definate NO without a wide body.

Hope this can help answer some of you wonders.

Cheers