Atp Highflow

[[[d a n n y]]]

wow not bad..

so wat exactly was needed?

[scotty nm35]

wow not bad..

so wat exactly was needed?

The lower fork mount for the rear shock is 5mm wider than the bush, requires spacer which I made on the lathe.

I used the upper mount off the originals but used the rubbers off the BC's

The height on the rear is wound right out, this is as far as the springs can go. You could possibly run a thicker rubber spacer, or new springs if you needed more height.

I would say this may have been designed for an arx, do the actual mounts change position on those compared to mine?

[[[d a n n y]]]

The lower fork mount for the rear shock is 5mm wider than the bush, requires spacer which I made on the lathe.

I used the upper mount off the originals but used the rubbers off the BC's

The height on the rear is wound right out, this is as far as the springs can go. You could possibly run a thicker rubber spacer, or new springs if you needed more height.

I would say this may have been designed for an arx, do the actual mounts change position on those compared to mine?

hm.. very intresting..

ill find out more about it in time

[andy65b]

Looks good Scotty. The rear is very low.

From what I have read there is no difference in the components between the RS and ARX for suspension.

[scotty nm35]

Looks good Scotty. The rear is very low.

From what I have read there is no difference in the components between the RS and ARX for suspension.

I would love to rip the wheel off one. Anybody around south east Melb with an ARX?

So what gives the ARX its height if the parts are the same?

[andy65b]

I would love to rip the wheel off one. Anybody around south east Melb with an ARX?

So what gives the ARX its height if the parts are the same?

It is the springs, shock and wheel size.

If you want to send me your VIN I can check some of the part numbers be your car and mine and see if they are different.

You mentioned that you used the mounting on the rear from the old shocks. I had to do the same with the Bilstiens also.

[nickcorr]

Hi Scotty, if you still need to see an ARX, let me know...

I would love to rip the wheel off one. Anybody around south east Melb with an ARX?

So what gives the ARX its height if the parts are the same?

Edited August 21, 2009 by nickcorr

[scotty nm35]

Hi Scotty, if you still need to see an ARX, let me know...

I would love to see it, In fact Im amazed I havent seen you already.

Drop around for a coffee if you like.

[nickcorr]

Currently in the UK, but will let you know when I am back...

Keep an eye out for a silver ARX, it should be locked in the garage....

I would love to see it, In fact Im amazed I havent seen you already.

Drop around for a coffee if you like.