Jump to content
SAU Community

Recommended Posts

ever since iv had my car (18months now i think :)) the thermo fan on front of the radiator, i dont think its ever turned on. im guessing its linked to the A/C? how much are new ones...and is it worth getting a second hand one or am i better off buying a brand new one. im wanting to retrofit one from a VX SS commodore, cos i know they move alot of air :(

Link to comment
https://www.sau.com.au/forums/topic/283174-thermo/
Share on other sites

pretty sure its more of an emergency fan, IE if it gets hotter than a set temp it will kick in.

The aircon wouldnt need it, see the MASSIVE clutch fan sitting there? :mrt: put your hand infront of the radiator when the cars inside and feel how much air rushes past your hand heh

Link to comment
https://www.sau.com.au/forums/topic/283174-thermo/#findComment-4765370
Share on other sites

pretty sure its more of an emergency fan, IE if it gets hotter than a set temp it will kick in.

The aircon wouldnt need it, see the MASSIVE clutch fan sitting there? :mrt: put your hand infront of the radiator when the cars inside and feel how much air rushes past your hand heh

guy is right. I remember waaaaaaay back when we had this discussion. That fan will only kick in if things get heated. More so in summer. In winter you will not see it on.

Link to comment
https://www.sau.com.au/forums/topic/283174-thermo/#findComment-4765622
Share on other sites

what's the normal water temp for an rb25det/neo with all thermos and radiator working properly ? I just recently hooked up a new water temp gauge (aftermarket) to my radiator hose (grounded and insulated) and it shows temps never higher than 86 degrees or so.

BUT the ecu (using consult) shows up to 96 degrees.

An auto sparky I spoke to said to me he's seen a problem like this once (not on a skyline) and it turned out to be an ECU problem ..the battery inside the ecu was dead and reason why it was showing wrong voltages for the factory water temp sensor. Once he changed the battery inside the ecu, that fixed it. Any ideas if Skyline ecu's have batteries inside of them ?

Link to comment
https://www.sau.com.au/forums/topic/283174-thermo/#findComment-4776203
Share on other sites

I guess its just as likely or more likely that I have crap clogging my 10 year old factory radiator/hoses or perhaps even the thermostat sticking a bit... whats the most likely? Where to start? Hate spending time and money and getting 0 results (like a $200 genuine o2 sensor that brough 0% fuel economy improvements)

Link to comment
https://www.sau.com.au/forums/topic/283174-thermo/#findComment-4777525
Share on other sites

I guess its just as likely or more likely that I have crap clogging my 10 year old factory radiator/hoses or perhaps even the thermostat sticking a bit... whats the most likely? Where to start? Hate spending time and money and getting 0 results (like a $200 genuine o2 sensor that brough 0% fuel economy improvements)

Id say thats a good start...

If it was me, i would be doing a full system flush out. Drain the radiator and overflow, and if you can, find the bolt on the block to drain the block too. (there ARE pictures somewhere on SAU.. someone might have them handy.) I think it could also possibly be the water drain from the turbo?? Not sure.

Run some of that anti gunk crap through the system, flush it again, new thermostat would be a great investment, and if you want a new radiator cap too. New coolant, fresh water and i guess you could throw some water wetter in there if you wanted too.

Link to comment
https://www.sau.com.au/forums/topic/283174-thermo/#findComment-4777630
Share on other sites

i have never found those gunk remover stuff to be all that effective. the best way is to get it professionally cleaned as they actually remove the end tanks to do it.

that said, there is no garantee that this will do anything (although certainly not a bad thing to have done anyway). but the point is that you said that your aftermarket gauge is reading different to the ecu. this means that 1 of the gauges is reading incorrectly. where did you mount the sensor for the new gauge?

edit: if you do decide to get a new radiator cap, i wouldn't go any higher pressure than stock, for the simple fact that they are designed to release pressure at a certain level. if you go a higher pressure, the pressure it releases at may be higher than what other components in the cooling system can handle, so you may end up blowing a hose or an end tank of the radiator.

Link to comment
https://www.sau.com.au/forums/topic/283174-thermo/#findComment-4777876
Share on other sites

instead of mucking around with the puny factory radiator that may be clogged and need recon I was thinking of getting something aftermarket when i spotted this for only $199

has anyone used these FLYN 40mm dual core radiators ? Are they any good? I really don't wanna put some yumcha item that's gonna work like shit and overheat my engine http://cgi.ebay.com.au/FLYN-RADIATOR-FOR-R...alenotsupported

Link to comment
https://www.sau.com.au/forums/topic/283174-thermo/#findComment-4778228
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...