Jump to content
SAU Community

Recommended Posts

Probably cause your ecu is trying to protect the motor! Stock turbo can't go past 13, at 14 it will blow the turbo. U got a pretty cheap controller? hence the spikes!

Probably run a few more mod- cooler and turbo back exhaust if u wanna run more than 10, then your ecu needs to be changed or remapped.

U will find the highest boost on redline gear 3!

Link to comment
https://www.sau.com.au/forums/topic/283263-boost/#findComment-4766421
Share on other sites

Probably cause your ecu is trying to protect the motor! Stock turbo can't go past 13, at 14 it will blow the turbo. U got a pretty cheap controller? hence the spikes!

Probably run a few more mod- cooler and turbo back exhaust if u wanna run more than 10, then your ecu needs to be changed or remapped.

U will find the highest boost on redline gear 3!

ok, the turbo won't blow the moment you hit 14psi. i was running my stock turbo on my 33 at 14/15psi for a year and never had an issue. i know people who have run up to 16psi and not had an issue.

as for the ecu stopping it from going any higher, that isn't right either. the ecu has protections in it, but it won't magically stop it going any higher. you can go higher but it will start throwing tantrums. without knowing your setup i couldn't say why it isn't boosting any higher than 13psi. if you still have a stock exhaust then that would explain it, or if you still have a stock cooler, that could also be a contributing factor. or it could be a problem with the controller.

Link to comment
https://www.sau.com.au/forums/topic/283263-boost/#findComment-4767202
Share on other sites

Probably cause your ecu is trying to protect the motor! Stock turbo can't go past 13, at 14 it will blow the turbo. U got a pretty cheap controller? hence the spikes!

Probably run a few more mod- cooler and turbo back exhaust if u wanna run more than 10, then your ecu needs to be changed or remapped.

U will find the highest boost on redline gear 3!

Yeah as mentioned above your ecu wont control boost. your turbo won't blow at exactly 14, could blow at 12 or could last years at 15 it's always a gamble.

Gizzmo controller is not a cheap unit and is a quality bit of gear so i wouldn't worry about that.

the advice to run bigger exhaust and cooler is spot on it never hurts to have more cooling and flow.

Link to comment
https://www.sau.com.au/forums/topic/283263-boost/#findComment-4769019
Share on other sites

Yeah as mentioned above your ecu wont control boost. your turbo won't blow at exactly 14, could blow at 12 or could last years at 15 it's always a gamble.

Gizzmo controller is not a cheap unit and is a quality bit of gear so i wouldn't worry about that.

the advice to run bigger exhaust and cooler is spot on it never hurts to have more cooling and flow.

its got a frount mount and a cat back exzaust allready on it

Link to comment
https://www.sau.com.au/forums/topic/283263-boost/#findComment-4770440
Share on other sites

Your probably running out of a lot of things, fuel, turbo, spark even.

Try getting your fuel pressure checked, regapping your plugs to 0.8, check your wastegate setting, turbo size?, dump system?

My thought anyway.

Link to comment
https://www.sau.com.au/forums/topic/283263-boost/#findComment-4772453
Share on other sites

Your probably running out of a lot of things, fuel, turbo, spark even.

Try getting your fuel pressure checked, regapping your plugs to 0.8, check your wastegate setting, turbo size?, dump system?

My thought anyway.

just got a brand new walbro fuel pump dont think it would be that

Link to comment
https://www.sau.com.au/forums/topic/283263-boost/#findComment-4772686
Share on other sites

just got a brand new walbro fuel pump dont think it would be that

Did you run a separate earth? fi you just replaced your pump and the car is playing up, I'd start there.

PS did it do this before you replaced the pump?

Link to comment
https://www.sau.com.au/forums/topic/283263-boost/#findComment-4776343
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Congrats on the career change!  I did something similar at the start of the year too, left IT / corporate after nearly 2 decades. Soooo when's the motor coming out for the spark plug change?
    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
×
×
  • Create New...