Jump to content
SAU Community

Recommended Posts

My friend and myself were on the way home when this black r34 was following us in our skyline. they followed my friend to where he live and attacked him with a spanner.

they were aboriginal from what my friend had stated.

Beware Guys!!!!!!!!!! do not stop when a black r34 coupe is following you.

was a police report made?

have you got any more information?

Police need to catch these guys before they attack someone else!!!

The police know who these ppl are. I've identified 2 of these ppl before and the police done nothing. I've chased them down hindley st before when they were in a stolen car.

Hope your ok mate.

Sorry to hear about your GTR it looks really nice, I've seen it around before.

This f**ks me off. The law punshes 'hoon drivers' more then they punish Aboriginals who commit crimes. Shame we have to live in fear because there are too many do-gooders in this world to let proper punishment happen with Aboriginals. If it were white people jacking cars they would be put in the slammer.

Sorry to hear about your GTR it looks really nice, I've seen it around before.

This f**ks me off. The law punshes 'hoon drivers' more then they punish Aboriginals who commit crimes. Shame we have to live in fear because there are too many do-gooders in this world to let proper punishment happen with Aboriginals. If it were white people jacking cars they would be put in the slammer.

lol did you leave your KKK outfit home again??

I'm all for chopping off thieving bastards fingers one at a time, but only because they're thieving bastards, being Aboriginal has nothing to do with it. If you'd been to a prison lately, you'd surely know that Aboriginal people are already highly over-represented in our prison population, they certainly aren't being given any favours in court.

My blood's boiling just reading this thread.......glad you got it back bud.

I probably would've gone for his eyes and larynx rather than the keys...........and maybe snap his neck as he tried to drive off!!!!

+1

Hope you got it back in near enough good/original condition.

Bastards!

lol did you leave your KKK outfit home again??

I'm all for chopping off thieving bastards fingers one at a time, but only because they're thieving bastards, being Aboriginal has nothing to do with it. If you'd been to a prison lately, you'd surely know that Aboriginal people are already highly over-represented in our prison population, they certainly aren't being given any favours in court.

i think what benny_blanco is trying to say is that there is a certain group of aboriginals that are getting away with more then they should be.

like luke said, he identified 2 that stole his brothers car using force and a weapon and they were let off with a slap on the wrist.

my mates house was broken into by this certain group of aboriginals. stole a few things including the keys to his 33 and the the remote to the garage. as he chased them over the fence one of the guys pulled a crow bar on him while another said thanks for the new car and took off. came back later that night trying to open the garage to steal more shit. cops where called and nothing!

they were finally cought and let out 2 days later car never found. then one of them stole another car to visit his parents for christmas in whyalla.

sorry for the off topic stuff but im glad you got your car back. hope they steal the wrong car next and wraps themselves around a pole!

  • Like 1
i think what benny_blanco is trying to say is that there is a certain group of aboriginals that are getting away with more then they should be.

like luke said, he identified 2 that stole his brothers car using force and a weapon and they were let off with a slap on the wrist.

my mates house was broken into by this certain group of aboriginals. stole a few things including the keys to his 33 and the the remote to the garage. as he chased them over the fence one of the guys pulled a crow bar on him while another said thanks for the new car and took off. came back later that night trying to open the garage to steal more shit. cops where called and nothing!

they were finally cought and let out 2 days later car never found. then one of them stole another car to visit his parents for christmas in whyalla.

sorry for the off topic stuff but im glad you got your car back. hope they steal the wrong car next and wraps themselves around a pole!

:( Sorry, but that's one of the most hilarious lines I've ever read

So how was the condition of the car? And if someone is walking towards you with a spanner isnt it obvios you either need to punch on with this flamin mongrel or jump in your car and drive off.

Sorry about the situation

isnt it abit obvious there is something going on, if the aboriginies dont get no punishments. im not racist, but truth is that they get treated alot better by our government, cheaper tickets to the local pool (not sure if thats still on) governemt saying sorry for steeling their generation. etc.

anyways..

glad to hear you got it back mate, i definatly wont be stopping if im getting followed by a car, i wont drive straight home either.

Love all the tough guy talk. Doesn't matter how big and strong you are or who you know. If 3 or 4 people jump you from behind and smash your head in with a spanner there isn't a whole lot your going to be able to do.

lol did you leave your KKK outfit home again??

I'm all for chopping off thieving bastards fingers one at a time, but only because they're thieving bastards, being Aboriginal has nothing to do with it. If you'd been to a prison lately, you'd surely know that Aboriginal people are already highly over-represented in our prison population, they certainly aren't being given any favours in court.

you clearly don't know how many times they get away with stuff before they HAVE to be locked up as opposed to you or i committing the same amount of offense's

verry true Jarrad, Roo would of got em but :(

  • Like 1

Oh Steve I'm sure if all of the people on here were as tough as they are behind the keyboard there would be world peace and all that hippy shit. But the simple fact is if you're suprised and jumped by a group of guys you've lost all advantage of fighting back. Unless your trained like Ruby Roo is.

And no I'm not taking shots at anyone.

Edited by J-Dawg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...