Jump to content
SAU Community

Recommended Posts

Hi guys

Just an expression of interest wHether anyone would like to purchase the Brembo brakes of my 34 gtr number plate VSPC34 front and rear, will come complete with rotors, front are slotted rear are factory, calipers obviously, Have just installed EBC red ceramic brake pads in front and done about 200km since new. Rear pads still have heaps of meat left on them and also have a brand new set of EBC red ceramic pads rear. The pads cost me $650 for the front and rear and basically will go together with the whole kit.

Asking price $2500 the lot negotiable. These will be removed once my track brake kit comes in from Japan. These can be viewed right now on the car.

Also selling the factory 34 GTR seats. will be removed upon arrival of race seats.

Can also be viewed in car.

Asking price $2000 negotiable.

This is an expression of interest guys so please keep opinions to a minimum.

Photos of the car will be available tonight.

Anyone wants to talk price my number is 0402237825 name is George for those who dont know me.

Thanks in advance.

Edited by Adelaideprosound
Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/
Share on other sites

thats a really nice gtr mate, also you should have no worries selling the brakes at that price, lots of people chasing them at the moment... also the seats are well priced, and all look to be in good condition... where abouts are you located sorry mate (if you have already stated so)

cheers mate

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4780438
Share on other sites

I am in Adelaide. I am happy to post interstate via Fastway couriers , and i would appreciate no low ball offers because you will only get decline. This is not a desperate sale. These parts are of a well looked after GTR.

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4780507
Share on other sites

  • 1 month later...

Possibly......but I have a noob question, would these fit behind Volk GT-C's in 17 x 8 +38 offset on an R32? I'm guessing not...

but if they do, is there an off the shelf adaptor I could buy to fit the calipers to the R32 hubs?

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4891421
Share on other sites

Possibly......but I have a noob question, would these fit behind Volk GT-C's in 17 x 8 +38 offset on an R32? I'm guessing not...

but if they do, is there an off the shelf adaptor I could buy to fit the calipers to the R32 hubs?

To clear the brakes if your Volks are the face2 design then there wont be any issues with clearance. As far as the hub deisgn since i have never owned an r32 i dont know. And yes you can fit these brakes to an R32regardless of hub design.

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4895815
Share on other sites

To clear the brakes if your Volks are the face2 design then there wont be any issues with clearance. As far as the hub deisgn since i have never owned an r32 i dont know. And yes you can fit these brakes to an R32regardless of hub design.

bear in mind the difference in caliper mounting bolts. models prior to r34 use m12 bolts to mount the calipers, where r34's use m14. to fit r34 calipers to, say, an r32 or s14 etc you will either need to helicoil the calipers to take m12's or drill out the hubs to take m14's

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4900942
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
    • Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
×
×
  • Create New...