Jump to content
SAU Community

Recommended Posts

So i received a canary last night and am just curious about a few things.

Staggered wheel widths as i understand are a no no, correct? (i.e 7inch front 8inch rear)

Removal of the stock wing with LED brake light means i have to install a 3rd brake light in the window. Thats just my assumption but makes sence. Any one clear that up for me?

Finally, I too have been cursed by the dud drivers side electric window switch, so my window doens't go down at the moment. The Officer didn't pick me up on it just thought the inspector at licensing might?

Cheers,

Brock.

PS. if i could borrow anyones stock 33 rims or the day of inspection it would be greatly appreciated. money and/or "the carton" can be arranged.

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/
Share on other sites

For the brake light yes you do need a 3rd one in the middle.
A third brake light is compulsory on vehicles 1989 onwards, no more than 1.8m from the ground.

Mine never worked ever since I bought the car, I better get mine fixed soon :P

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4782519
Share on other sites

Cheers for info!

Another quick one, I've heard people getting done for not having any water in there windscreen sprayer. My concern is on of my jets is only shooting one stream instead of two, are they that picky at licensing??

Cheers,

Brock.

Edited by BROCKDOE
Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4782587
Share on other sites

Yes, they can pick you for having low water in the windscreen washer bottle.

If it's too much hassle to fix, leave it and see how you go. The chances of them picking it are pretty slim but just be aware that they may ask to see it working.

The nozzle won't be hard to clear. My advice is spend 30 minutes to give it a go and cover all your bases.

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4782877
Share on other sites

nephew is going through a yellow at the moment, they will check the center brake light but you can get them from repco . car must be 100mm of the ground at lowest point with 5 people and a full tank of fuel (cant believe that one), no staggered wheels. if you have a FMIC it must be permited

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4782946
Share on other sites

nephew is going through a yellow at the moment, they will check the center brake light but you can get them from repco . car must be 100mm of the ground at lowest point with 5 people and a full tank of fuel (cant believe that one), no staggered wheels. if you have a FMIC it must be permited

FMIC's don't need permits

With the staggered wheels/tyres unless it's stupidly different there shouldn't be an issue, I passed quite a few times with 235/45 & 255/40 & they never mentioned anything to me, the only reason the yellow sticker didn't come off was because I was waiting for mods approval....

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4783276
Share on other sites

Sweet deal. Water jet fixed, Installing brake light during the week. Might try get past with the staggered wheels, wrapped in fresh rubber too.

Any one have any idea about the electric window issue? Also I didn't think about this one until driving last night. I have blue lights in the foot area on drivers side and passenger side, should that be an issue??

Cheers,

Brock.

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4784419
Share on other sites

Sweet deal. Water jet fixed, Installing brake light during the week. Might try get past with the staggered wheels, wrapped in fresh rubber too.

Any one have any idea about the electric window issue? Also I didn't think about this one until driving last night. I have blue lights in the foot area on drivers side and passenger side, should that be an issue??

Cheers,

Brock.

dude if ur worried about drivers window i got a spare one here if u need ,u can have it, it took me 6months and and engineers certificate to pass mine and they still said no ,so after the 6th time with screema pipes installed mind u , they past, make sure ur pod is secure and u have a lead free battery or one that is ventelated to outside ,any questions ,fire away ive heard it all from the wankers

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4784593
Share on other sites

dude if ur worried about drivers window i got a spare one here if u need ,u can have it, it took me 6months and and engineers certificate to pass mine and they still said no ,so after the 6th time with screema pipes installed mind u , they past, make sure ur pod is secure and u have a lead free battery or one that is ventelated to outside ,any questions ,fire away ive heard it all from the wankers

so scr33ma, whats the go with intercoolers. whats the trick with getting them passed. this is the only worry i have on mine.

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4785060
Share on other sites

so scr33ma, whats the go with intercoolers. whats the trick with getting them passed. this is the only worry i have on mine.

When I had mine done it had to be securely fixed. Others I have seen have stated that they had to be meshed.

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4785117
Share on other sites

Power window issue is probably the same deal I had with mine (units may or may not be similar between 32 and 33.. I don't know). There's a little relay unit that's usually screwed to the door frame, that was dead, got a replacement from a wreck for cheap.

Link to comment
https://www.sau.com.au/forums/topic/284532-yellowd/#findComment-4785168
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • I hear that would involve some nice country road drives into the hills for Mark...
    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...