Jump to content
SAU Community

Im240 Emissions Test

Blinky101

By Blinky101,
in Western Australia

 Share

Recommended Posts

Blinky101 Enthusiast

Blinky101

Posted
Posted

Hi Everyone

A bit of background reading for this thread, check out (My First Yellow, WooHoo)

As it stands now, I have been told I have 28 days to complete an IM240 Emissions Test. This is the same test that people have been talking about in SAUWA here.

Anyway. I have contacted Konstcki's Garage to get the ins and outs of this test and have recieved some helpful knowledge. Last month a 300C running a 450 big block and doing the quater mile in 11's passed this test on the first attepmt. With this in mind I set about asking the guys at Konstecki's to send me out information and quotes for work to help me pass this test.

I am now waiting for their advice. They also gave me the price break down for the test.

$650 - Testing

$130 p/h for labour

$220 p/h for tuning

The test is a 3 hour event where the car is tested 5 times and needs to score 5/5 passes. The guys at Konstecki's seem helpful enough and are willing to talk you through the process (no bad press so far).

Anyway, I now need to get a few bits done, but the upside is that once the work is done, and I successfully pass the test, all my emissions related mods will be legal. Ie 3 inch turbo back exhaust, plumb back BOV, intercooler, cat etc...

I would however pass on a note of warning from my experience so far. If you have obvious illegal bits showing on your car then get them fixed. Basically as of 2 weeks ago the DPI have been pushing the IM240 test, so any car that gets Yellowed WILL be subject to it. No exceptions.

I will post more when I know more, feel free to comment or ask questions as I have probably forgotten to put bits in.

Cheers Blinky

Link to comment
https://www.sau.com.au/forums/topic/286098-im240-emissions-test/
Share on other sites
  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Hanaldo Grand Master

Hanaldo

Posted
Posted (edited)

Gay, seems like i will be getting told about this tomorrow when i go for the pits :blink:

I guarantee the DPI pushing this in the last two weeks, and the incredible amount of yellow sticker threads we have been seeing are no coincidence. Seems the police think they have a new way to get our cars off the road

Edited by Hanaldo
Nic_A31 Grand Master

Nic_A31

Posted
Posted

Have Kostecki's bragged about any turbo I6s passing emmisions yet?

All this talk of 4 second 15litre V8s passing, maybe because its their thing and all, but have the come out and said "We passed this 9 second quad turbo GTR running 2000cc injectors and no cat...AWESOME shit"

I don't want to shit down anyone's optimism, but they brag about their V8 scores all the time, they dont like 6 cylinders :blink:

gazza750 Veteran

gazza750

Posted
Posted
I would however pass on a note of warning from my experience so far. If you have obvious illegal bits showing on your car then get them fixed. Basically as of 2 weeks ago the DPI have been pushing the IM240 test, so any car that gets Yellowed WILL be subject to it. No exceptions.

I will post more when I know more, feel free to comment or ask questions as I have probably forgotten to put bits in.

Cheers Blinky

its been going since february for the testing not just the last 2 weeks

and dont rush into it

The MTA are trying to get it dropped

read the very large thread on antilag about it

Guest

Guest

Posted
Posted

Get a 4 or 5 gas test done to get a base line, don't turn up there as others have and go what now after paying $1,000. They say the two test are different but you can work out what is an issue you might have later.

The ANTILAG LINK is worth reading as 845 replies and 19,294 views, I put it at the later part of thread and dufus in the thread is an employee of KEC.

You say with the list of mods the Cat has been changed, there are quite a few "Race Only" cats out there so be careful.

R34GTTSKY Experienced

R34GTTSKY

Posted
Posted

^ i was under the impression that you get a yellow sticker...

THEN go to the pits

and if the pit inspectors think your car requires an IM240 test THEN you'll be required to do the test

how to fix the problem;

when you get a yellow sticker... change your emission modifications (as well as all the other illegal sh*t you have)... go to pits and pass

swap-over parts to how it was before the yellow, easy!

EDIT: can anybody here verify this for me?

pretty sure that will help everyone here too

Dsturbd Grand Master

Dsturbd

Posted
Posted
when you get a yellow sticker... change your emission modifications (as well as all the other illegal sh*t you have)... go to pits and pass

swap-over parts to how it was before the yellow, easy!

If the police have put on yellow that IM240 is needed theres no way out ....

syfon Veteran

syfon

Posted
Posted (edited)

I spoke to one of the inspectors at Welshpool Technical Section today and have been advised that only cars that are modified (i.e. aftermarket exhaust/FMIC/intake/cams/ECU/etc) will require to have the IM240 Emissions Test conducted.

I spoke to a customer who owns a stock-standard XR6-Turbo and has to go do the test, however I managed to get him out of doing the test due to his car being factory specifications.

So basically, if your car is stock-standard, you will not have to go and do the emissions test....

Also, not all modified cars need to have the IM240 Emission Test conducted as of yet - my car passed pits 2months ago and has a turbo-back exhaust, FMIC, etc. However, I believe that as time passes, it will be mandatory for all modified cars that go over the pits to have this emissions test conducted. As more and more cars go for the test, the testing will become cheaper - I still feel sorry for you guys....it's bloody expensive and from my point of view, just a load of wank.

Edited by syfon
Nic_A31 Grand Master

Nic_A31

Posted
Posted

Did any of you toss-pipes actually read the articles on the DPI site when this first came up?

It only needs an IM240 test if it meets the criteria, ie, pre-89, aftermarket emissions influencing equipment, ADDED turbo's, etc

So all you guys with stock R33 GTSTs really have nothing to worry about.

As for swapping and swapping back - retard? you'll get another yellow, more wasted time and money!

That's like letting Al Qaeda operatives into Australia just because they claim they're Christian now, bullshit, they're still filthy terrorist c**ts that will revert back and cause more problems? You're not clever, just fork out some cash, and get the setup you WANT legalized, then you dont need to pass the pits every week.

Also, not every modified car needs an IM240, only Skylines, you guys should know that by now :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...