Jump to content
SAU Community

Recommended Posts

Last night cruising the lovely streets of Melbourne, we came across a nice white R33 GTR with the plates GTR-330.

Does this person visit these forums?

We were curious as to what the 330 stand for. Does it stand for 330rwkw or rwhp, 330kw or hp at the fly or is it simply coz the car was a R33?

Link to comment
https://www.sau.com.au/forums/topic/28679-gtr330-anyone/
Share on other sites

Originally posted by Jamezilla

Oh - and it has a 3-litre kit with N1 turbos. Perhaps this lends more to the 330 being kw :)

Would that be 330rwkw or 330rwhp and either at the fly or wheels??

I'd want to see that to believe it. I have my reasons.

Link to comment
https://www.sau.com.au/forums/topic/28679-gtr330-anyone/#findComment-592701
Share on other sites

Originally posted by R31Nismoid

Reasons?

HHmm...  

/sniffs the air

I personally saw it get owned last night by a GTR with 310rwkws.

The launches were both pretty good but the other GTR by the end of second was a bout 3 cars ahead. No braking was involved until the red lights ahead.

Link to comment
https://www.sau.com.au/forums/topic/28679-gtr330-anyone/#findComment-592728
Share on other sites

Leewah , and others, this GTR330 is a customer of BMT. Its owned by a guy called Desmond who bought this car off another guy who had previous work done on it by us. It hasnt got 330 at the wheels. Its a 33 thats why. It aint that quick, but its very tight and tidy. mad Diamond audio install, nice wheels...and around 230 rwkw at the moment. Lets see how its goes in the near future...maybe he might have enough balls to step up to the plate with the big boys soon.

Later boyz .........

Damian

Link to comment
https://www.sau.com.au/forums/topic/28679-gtr330-anyone/#findComment-594293
Share on other sites

Yeah , i do agree that its a clean car.... but i guess most cars would after a full respray. I should sell him my T78 turbo kit and cams, and then we should see well over 330rwkw. Then his plates would be justified. Just a quick one, have you had any dramas with your Giken gear set? Because, as you maybe would have heard, a few months back, i broke 3rd gear in my 32 with a full giken gear set. Not happy. Thinking of a Schifzer or Guru cross gear set. What do you reckon, because for you to pull 10's with that box and not breaking anything... i want to know why i did. I was changing at 7800rpm only, and it shattered all of 3rd. Looking at a gear set or complete gear box..... you know anyone with any of these combos. Because, i aint prepared to shell out 7-8 grand for a brand new one, or 12-20 grand for a dog box.

Link to comment
https://www.sau.com.au/forums/topic/28679-gtr330-anyone/#findComment-594453
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...