Jump to content
SAU Community

Recommended Posts

Hey guys need to reluctantly sell the old girl.

Check my profile for photos or contact me [email protected] or on 0422455443

Have had the car for over 7 years now and know all it's history.

selling for $7500 neg.

Live in Melbourne

Link to comment
https://www.sau.com.au/forums/topic/287219-r30-4dr-for-sale/
Share on other sites

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

1982 L20ET 4 door bog stock orginal R30.

one of the first to arrive in Aust over ten years ago. Imaculate inteirior, and well kept motor.

HR30 GT 4dr

L20ET, dyno'd - 115kw @ wheels (totally stock, not even a cooler) 240k on the clock

blitz BOV, Pod Filter, 10mm custom leads thats it in the way of motor mods. (most things have simply been renewed/rebuilt to keep it fit, list too long so i won't go into it)

Lowered on a set of custom King springs, and adjustable Koni's

Rolling on 15inch Work, E-wing rims using standard 5 speed short box (rebuilt x 2) Exedy HD clutch

standard brakes, just bendex ultra something pads.....

Very clean inside and under bonnet just needs some panel love from someone who has the time.

Will be very sad to see her go but thems the breaks.

Have opted for a Chaser to replace my daily drive but i'm still a Nismo fan through and through but Chaser's do kick ass

If you were asking $750.00 you might get some interest, but a Paul Newman version coupe sold for about $6500.00 in ACT about a year ago and the new owner can't get that for it now and you want $7500.00 for a stocky HR30 sedan.

There are DR30's on offer for between $6 & 8000.00 and they can't get any interest either.

Your selling to a very small market and most people already have their ride.

I wish you luck, because your going to need every bit you can muster at that price.

Cheers, D

i just sold my completely stock HR30 4 door $1000 and that was with brand new radiator thermo fans and new tyres so i think you will be pushing sh** uphill with apitchfork to get 7500 for yours

do r30's have the same demand in arabia as the C-series skylines? maybe they'll pay that much??

i dont like putting people down here but im just about to spend the same money on an R33 coupe. hmmmm.... R30 or R33... hmmmm... you see what im sayin?

(dont worry guys the c210 aint going ANYWHERE!)

Edited by Silent Shadow

Hi,

OK, the (negotiable) asking price is high but there is another way of looking at it.

Imagine you've bought a 'bargain' R30 (nothing special but in fair condition). What would it cost to "do it up" to the level of GTR30's car? Add the cost of a full re-trim, springs, wheels and tyres, engine modifications, brakes, repaint, etc... What would all that cost? My guess is at least $5000 which is approaching the price listed here on the for sale thread.

As Ghostrider mentioned, it's a limited market and there are plenty of other $7000 cars out there. There's hope though, buying isn't always a rational decision. :yes:

JH

well everyone's point of view is appreciated, some more than others but they way i see it is if it doesn't sell then i'll just have to hold onto it... other than the paint it is in extremely good condition for it's age and ultimately if i could i would get it painted and put it on blocks, tuck it away somewhere quiet because some time down the line someone will be gagging for a factory stock example.

yes you can buy an r32/33 for similar prices but how many of those do you see getting around?

yes the market is small for r30's that is the whole reason for the price, it is 'rare'

yes it needs new paint but if it had that a much higher price tag wouldn't be unrealistic.

do r30's have the same demand in arabia as the C-series skylines? maybe they'll pay that much??

i dont like putting people down here but im just about to spend the same money on an R33 coupe. hmmmm.... R30 or R33... hmmmm... you see what im sayin?

(dont worry guys the c210 aint going ANYWHERE!)

No, there is virtually no demand for r30's in Kuwait etc. They aren't into the body shape, and all their C210's have L28 conversions. Arabs in Australia may pay up to $500 for R30's which then promptly get cuts to bits and shipped as spares for the C210s. The bodys and L24s get thrown away. While they aren't really popular, some Arabs drive 280zxs, or at least are prepared to pay a little more to strip them for L28 conversions.

Oddly, despite the STUPID amount of money they spend shipping, L28ing, converting C210s/240ks to LHD, registering them, smashing and fixing them they don't have much interest in 240zs, 260zs (even US LHD cars) due to higher initial purchase costs. I guess part of the Arab mentality is that they have to feel like they are getting a bit of a bargain, as well as the car they want.

Errr... not that I'd ever wish that David's (or anyone else's) Skyline ends up as a body shell, I have a great contact for scrap metal removal in Melb. There's usually a bit of beer money in it for the seller.

Errr... not that I'd ever wish that David's (or anyone else's) Skyline ends up as a body shell, I have a great contact for scrap metal removal in Melb. There's usually a bit of beer money in it for the seller.

ha.. beer money!!

considering i'm a bar manager one thing i don't need is more beer :)

good thought though

and yes it is a sad thing to see a genuine r30 import scrapped or stacked

The best advice I can give you is try getting it listed in Japan. R30's have reached cult status in Japan and finding them in anything like reasonable condition is getting more difficult everyday.

But first I would be very certain of the specifications you quote as the Japanese know all, when it comes to their own cars. I'm referring to your bog stock, no mods 115kW @ the wheels on a dyno, as the factory specs say 145ps which converts to 106.65kW at the flywheel and StagefummerII in NZ did heaps of mods to his L20et to get 140 something kW @ wheels. It's eazy to blow smoke up peoples asses here in Oz as most suffer from NFI syndrome & don't have a clue if it's right or wrong.

I can't see them being of any significant value for many years to come and maybe 10 or 20, or even 30, when they are so rare in Australia, owning one will be a novelty. A bit like the genuine vintage cars of early 1900's are today. The two (2), I have will never be sold, or not in my life time, so my kids might get some financial benefit from them.

The Paul Newman version doubled in value the minute he was confirmed dead, but ONLY in Japan.

For some reason the R30 is regarded very highly in Japan, but not in Oz as it is a very niche market & only the diehards really want them. Interestingly enough, lots of old R30 owners in Oz are trying to buy them again as they find driving GTR's, EVO's, Rex's etc so much more boring & without the challenges our R30's have. Sure they go quick, but technology has taken over the driving skills necessary to drive old cars quick.

Like most things, our toys stay OUR toys and the $$$$'s, love and devotion that gets put into them reaps zero cash reward when & if they are needed to be sold. Doesn't matter how rare anyone thinks it is, it's really only worth what someone is prepared to pay for it and that often is "current market value" and if that's not to your likeing, it's tough if it HAS to be sold.

As I said before, your going to need a lot of luck to pass it off for the money you believe it's worth.

Cheers, D

$1000 was a joke offer David!, It would likely see closer to $3000 or so in the state I saw it in.

Can vouch that it goes great! I especially luved the 80's turbo kickin the back style setup one boost is hit!

All it really needs is a bit of TLC up the front, and a stock coloir re-spray,,, oh and a L28 with some balls bits bolted on!

$1000 was a joke offer David!, It would likely see closer to $3000 or so in the state I saw it in.

Can vouch that it goes great! I especially luved the 80's turbo kickin the back style setup one boost is hit!

All it really needs is a bit of TLC up the front, and a stock coloir re-spray,,, oh and a L28 with some balls bits bolted on!

i have a guy that has a L28ET i could chuck straight in... T3 as well for $2k... all it would need is the long box not my short one (which is quite hard to find apparently)

Still not big enough, Ive grown another inch or so since doing 6 months of light duties and physio!

I have a permanent lump on me noggin from banging against the seatbelt mount on the pillar...

A coupe is the end goal... just gotta find one that is a good price!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
×
×
  • Create New...