Jump to content
SAU Community

Croydon's Do It Again!

White 35

By White 35,
in R35 GTR

 Share

Recommended Posts

White 35 Enthusiast

White 35

Posted
Posted

Jim at Croydon's has done it again!!!

Ive been watching everyone tune their cars locally and in the USA for about 6 mths now. I didnt rush these mods and originally I was going with a base Cobb map 1 tune to match my midpipe etc but after watching 09GTR work with Croydons the custom tune is the only way to go.

Aside from the car obviously being more powerful its the perfect torque curve that makes the car more exciting to drive. VDC must be to R mode under full power otherwise TC cuts the throttle.

So the mods are:

CBRD Midpipe (the best midpipe ive ever heard - zero drone and under throttle sounds unreal)

Mines filters and

Custom Cobb tune from Jim

Standard the car put out 295kw. But now the car is putting out an easy 340kw (i think 15 pound boost) at the wheels, there is more power to come from these mods above but we backed it off until we can get some better HKS plugs.

Tonight the car ran 3.3 sec to 100kmph with over half tank of fuel. Didnt get it off the line perfectly but 3.3 is good enough for now and this should translate into low 11's. And the car has only 1600kms on the clock.

Next up - Actuators, HKS Boost controller, high flowed catted turbo pipes, GFB Blow off valves and Endless MX72 Pads all from Croydon's.

Highly recommend you speak to Jim at Croydon's if your thinking about some simple mods.

Link to comment
https://www.sau.com.au/forums/topic/287983-croydons-do-it-again/
Share on other sites
09GTR Collaborator

09GTR

Posted
Posted
Jim at Croydon's has done it again!!!

Ive been watching everyone tune their cars locally and in the USA for about 6 mths now. I didnt rush these mods and originally I was going with a base Cobb map 1 tune to match my midpipe etc but after watching 09GTR work with Croydons the custom tune is the only way to go.

Aside from the car obviously being more powerful its the perfect torque curve that makes the car more exciting to drive. VDC must be to R mode under full power otherwise TC cuts the throttle.

So the mods are:

CBRD Midpipe (the best midpipe ive ever heard - zero drone and under throttle sounds unreal)

Mines filters and

Custom Cobb tune from Jim

Standard the car put out 295kw. But now the car is putting out an easy 340kw (i think 15 pound boost) at the wheels, there is more power to come from these mods above but we backed it off until we can get some better HKS plugs.

Tonight the car ran 3.3 sec to 100kmph with over half tank of fuel. Didnt get it off the line perfectly but 3.3 is good enough for now and this should translate into low 11's. And the car has only 1600kms on the clock.

Next up - Actuators, HKS Boost controller, high flowed catted turbo pipes, GFB Blow off valves and Endless MX72 Pads all from Croydon's.

Highly recommend you speak to Jim at Croydon's if your thinking about some simple mods.

Geez, CRD must be good to make you go fast White 35!

  • 3 weeks later...
White 35 Enthusiast

White 35

Posted
  • Author
Posted
Thats awesome for such a few simple mods, must be very happy man.

yeah its certainly a lot more exciting to drive. the car only has 2600kmson it and as the kms go up i think its getting faster. only negative is that it comes on boost so hard at 3-5500rpms and then boost falls away slightly. im going to work with Croydons trying some new Cobb tuning to see if we cant get more consistent boost to the redline. The car is a complete handful in damp conditions and just spins the wheels in 1st & 2nd gear.

Maybe have to do Boost Controller and Actuators etc.

handbrake Veteran

handbrake

Posted
Posted
Just ordered Stillen Sway bars from Forged Performance in the US and H&R Wheel Spacer kit from Perrin Performance in the US.

I'll have them installed in a few weeks and report back the handling changes.

Plus i want a set of these rims!!

Volk Racing Hi metal bronze RE30 19X10 +30 and 19X11 +20 or +25

Hoosiers 295/30/19 front and 315/30/19 rear.

$4190 shipped to Australia, maybe better if group buy

Sharif at forged performance, about to get some for myself, aussie dollar now better than when I was first considering this.

White 35 Enthusiast

White 35

Posted
  • Author
Posted
Volk Racing Hi metal bronze RE30 19X10 +30 and 19X11 +20 or +25

Hoosiers 295/30/19 front and 315/30/19 rear.

$4190 shipped to Australia, maybe better if group buy

Sharif at forged performance, about to get some for myself, aussie dollar now better than when I was first considering this.

yeah im still giving thses rims some serious thought - although the Zele rims are sick as well... i recon the $$ will get a bit stronger as well - before it comes crashing down again! great time to be ordering from the US.

Marko R1 Grand Master

Marko R1

Posted
Posted
Jim at Croydon's has done it again!!!

Highly recommend you speak to Jim at Croydon's if your thinking about some simple mods.

i dont drive a 35 but plan to buy one in the future - as for jim @ crd...u got that right :(

ive taken both my gtr's to jim & nobody comes close (ive been around to 'other' tuners & it has always been chalk & cheese)

R32 Stuart Community Regular

R32 Stuart

Posted
Posted
i dont drive a 35 but plan to buy one in the future - as for jim @ crd...u got that right :blink:

ive taken both my gtr's to jim & nobody comes close (ive been around to 'other' tuners & it has always been chalk & cheese)

:happy: Spot on Marko R1 - Jim know's his Nissan's Our R33 - 2 records - OP South - 46.81 and EC - 1.44.19 still on 20psi, can't wait till finished set-up!!

Marko R1 Grand Master

Marko R1

Posted
Posted
:) Spot on Marko R1 - Jim know's his Nissan's Our R33 - 2 records - OP South - 46.81 and EC - 1.44.19 still on 20psi, can't wait till finished set-up!!

i remember the last time we discussed your lap times, low 40s at EC is a fantastic time :happy:, u were running 300awkw if my memory serves me right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...