Jump to content
SAU Community

Recommended Posts

Hey all,

Got a bunch of parts for sale. PM me with any questions etc. Pickup is from Inner West of Sydney and postage is available at buyers expense for most items. Pics available on request. Thanks.

*** VL Stuff:

- Wrecking 1986 Manual VL Commodore...all interior + exterior parts available, chrome bits, bodykits, gearbox (low kms RB20DET box), exedy clutch, flywheel, engine accessories, ecu, pedalbox, tailshaft, crossmembers, manual rack etc. Parts from $5 (PM me for price + availability...some parts gone already)

*** R32 Stuff:

- RB20 series 2 valley/coilpacks cover $20

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Good for parts $50

- RB20 or 25 crossover pipe w/bov mount $10

- RB20 rocker covers series 1 (painted black) $90

- Bottom half of RB20 plenum $20

- RB20 series 2 timing cover $5

- Top half RB20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $10

- Clutch fork from RB20 box $5

- RB20 alternator $70

- R32 Black Passenger Side Tail Light $50

- RB20 starter motor $50

- Vertex R32 rear bar in white gel coat (near new but few scratches + small cracks near side mounts) $150

- RB20 stock cams $50

- R32 4 door tail lights + rear lighting harness (drivers side has small chip on edge) $200

- Top centre rear bar bracket (suit coupe) $10

- R32 GTST coupe/4 door rear reinforcement (may suit GTR) $40

- R32 4 door rear bar silver (has been badly modified for coupe tail light conversion but still does its job) $10

*** R34 Stuff:

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in - Suit RB25 Neo engine $80

*** KE Corolla Stuff:

- KE55 chrome rear bar $150

- KE55 red diff drum to drum (new drum shoes...centre is broken but could possibly be welded to make locker) $50

- KE55 washer bottle w/motor $30

- KE55 original front TOYOTA grill badge (painted white w/chrome letters) $15

*** Random Stuff:

- 3M spraypainter mask/respirator kit (Near new) $80

- Unisafe spraypainter mask/respirator (Used once or twice) $50

  • 2 weeks later...
  • 2 weeks later...
  • 2 months later...

Hi how are you going mate? I couldn't reply to your message u left on my add cause I didn't have enough posts. Thought I would reply here. About them exhaust stuff and quarter window trim. I do have them but there not in very good condition. Window quarter trim is slightly peeling from sun and exhaust is stock front half to cat then 3" pipe + muffler + canon but has been scraped and dented. Not sure if you still interested in them or not. Let me know if you are and we could work out something.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...